SWC Forums

Pull up a chair...let's talk fishing.

Inflatable life ves...
 
Notifications
Clear all

Inflatable life vest malfunction

8 Posts
5 Users
0 Reactions
17.5 K Views
Augustus Cruse
(@)
Trusted Member
Joined: 18 years ago
Posts: 49
Topic starter   [#54196]

Hopefully someone will see this and check/ replace an out of date cartridge. I hope that was the reason for the one sided inflation. This was an accidental inflation after being off the water for nearly an hour. Wasn't wet or being moved. Life lesson learned cheaply.ilv_121.jpg



   
Quote
Mike Holloway
(@flatbottom)
Reputable Member
Joined: 15 years ago
Posts: 211
 

I spent 8 years as a helicopter overwater survival instructor (Helo Dunker) for the Marine Corp and we used these on a daily basis. It uses a cartridge filled with CO2 for inflation and has only one inflatable bladder. The CO2 cartridge will have a weight printed on it by the manufacturer and can be checked using a gram scale. It was not uncommon for our vests to appear to only inflate one side and when that happens the other side can be assisted by separating the Velcro manually, which is why the user should be familiar with these before they wear them and probably one of the reasons why these cannot be worn by persons under 16.



   
ReplyQuote
george mc donald
(@)
Reputable Member
Joined: 17 years ago
Posts: 374
 

I had 2 of mine inflate in the back seat of my truck ; seems high temps CAN cause an unintended inflate !!!!!



   
ReplyQuote
Rob Thomas
(@kicker30)
Reputable Member
Joined: 18 years ago
Posts: 286
 

Could be a couple different things there. How old is the vest and how long has it been since you inflated it? Normally those vests have instructions on them for doing a periodic check on them that includes manually inflating them to make sure the bladder hasn’t gotten stuck together and that they will still hold air when fully inflated, if the bladder has stuck together or there is a hole in it somewhere or both, then it may have forced the bladder open as much as possible then either escaped through a hole or through a relief valve to prevent overinflation. It could also have been a defective co2 cylinder that was never fully filled or just wansn’t totally seated or sealed up where it attaches to the vest. Try manually inflating it using the red tube and see if it will fully inflate and then if it will hold pressure for some period of time.



   
ReplyQuote
Tom
 Tom
(@seahorse)
Noble Member
Joined: 19 years ago
Posts: 1167
 

Just had a West Marine go off while sitting on the fly bridge completely out of any rain or weather. Purchased new in June with Hydro release.
Funny only one side deployed. Took it back to West Marine Wrightsville Beach today , they said never heard of this happening before and gave me a new vest no questions asked. :wtg:



   
ReplyQuote
Tom
 Tom
(@seahorse)
Noble Member
Joined: 19 years ago
Posts: 1167
 

Just had a West Marine go off while sitting on the fly bridge completely out of any rain or weather. Purchased new in June with Hydro release.
Funny only one side deployed. Took it back to West Marine Wrightsville Beach today , they said never heard of this happening before and gave me a new vest no questions asked. :wtg:



   
ReplyQuote
Augustus Cruse
(@)
Trusted Member
Joined: 18 years ago
Posts: 49
Topic starter  

The pfd was purchased 7/4/2016 and the cylinder has a date of 06/16. However, the bobbin has a date of may 06 which the manufacturer states should be changed out every three years. Surely they wouldn't have put a bobbin in a new vest that was thirteen years out of date.
The vest has held air for the recommended 16 hr. test.
When I first began to pull on the velcro of the side that didn't inflate it exploded on out like the side that opened. I didn't loosen much of the velcro at all before it opened.bobbin_789.jpg



   
ReplyQuote
Rob Thomas
(@kicker30)
Reputable Member
Joined: 18 years ago
Posts: 286
 

The pfd was purchased 7/4/2016 and the cylinder has a date of 06/16. However, the bobbin has a date of may 06 which the manufacturer states should be changed out every three years. Surely they wouldn't have put a bobbin in a new vest that was thirteen years out of date.
The vest has held air for the recommended 16 hr. test.
When I first began to pull on the velcro of the side that didn't inflate it exploded on out like the side that opened. I didn't loosen much of the velcro at all before it opened.



   
ReplyQuote
Share: