SWC Forums

Pull up a chair...let's talk fishing.

Knot question
 
Notifications
Clear all

Knot question

11 Posts
6 Users
0 Reactions
21.5 K Views
Jud Long
(@v-hull)
Trusted Member
Joined: 14 years ago
Posts: 68
Topic starter   [#44036]

I recently bought a used center console and now have a set of used offshore trolling rods to go with it (4 with Shimano TLD 25's and 2 with TLD 50 LRSA's). The mainline on the reels is in good shape, but they need new wind on leaders and swivels. I feel pretty comfortable with how to tie bimini twists and Albright knots (have done those on my live bait rods), but my question is about the knot for the swivel. What's the best knot to use with heavy mono or flourocarbon to tie on the swivel? I've tried Palomar knots, but it seems like they don't work so great with this large heavy line (can't get them to cinch down tight enough). I've also tried a double slip knot. It seems to work pretty well, I just don't have any experience with it. Thanks in advance for your help.

v-hull



   
Quote
William McCann
(@werewolf0711)
Famed Member
Joined: 15 years ago
Posts: 3133
 

I usually use uni knots on most all my mono. They have held so far. Even have used it on some heavier lines as well. What size line are you talking?



   
ReplyQuote
Jamie Blue
(@)
Famed Member
Joined: 20 years ago
Posts: 3660
 

I'm on team Uni as well. I've also never had a problem with the palomar in up to 130 lb line. Anything 100 lbs or over usually gets crimped though.



   
ReplyQuote
Dale A. Tycast
(@toad)
Prominent Member
Joined: 18 years ago
Posts: 722
 

I like the palomar knot for swivels, up to 100 lb. is not a problem. It's easy, quick and a strong knot. You prolly don't need more than 100 lb.on the 50's and 50 on the 25's. That's what we/I run on our 50's and 30's.



   
ReplyQuote
Dale A. Tycast
(@toad)
Prominent Member
Joined: 18 years ago
Posts: 722
 

I like the palomar knot for swivels, up to 100 lb. is not a problem. It's easy, quick and a strong knot. You prolly don't need more than 100 lb.on the 50's and 50 on the 25's. That's what we/I run on our 50's and 30's.



   
ReplyQuote
Gus
 Gus
(@getyasome)
Reputable Member
Joined: 15 years ago
Posts: 365
 

Use a Loop to Loop connection no swivel needed. I just put new topshot on my TLDS goes through the eyes no problem.



   
ReplyQuote
Jamie Blue
(@)
Famed Member
Joined: 20 years ago
Posts: 3660
 

Use a Loop to Loop connection no swivel needed. I just put new topshot on my TLDS goes through the eyes no problem.

Still a good idea to have a swivel at some point like at your windon or other leader to help with line twist.



   
ReplyQuote
david m. mabes
(@bohemian)
Estimable Member
Joined: 20 years ago
Posts: 221
 

We use the offshore knot with good results .
Capt. Dave Mabes



   
ReplyQuote
Gus
 Gus
(@getyasome)
Reputable Member
Joined: 15 years ago
Posts: 365
 

Use a Loop to Loop connection no swivel needed. I just put new topshot on my TLDS goes through the eyes no problem.

Still a good idea to have a swivel at some point like at your windon or other leader to help with line twist.

Yes its a must. I use a 300lb snap swivel from main line to rigged leader.



   
ReplyQuote
Jamie Blue
(@)
Famed Member
Joined: 20 years ago
Posts: 3660
 

Use a Loop to Loop connection no swivel needed. I just put new topshot on my TLDS goes through the eyes no problem.

Still a good idea to have a swivel at some point like at your windon or other leader to help with line twist.

Yes its a must. I use a 300lb snap swivel from main line to rigged leader.

:wtg: :wtg:



   
ReplyQuote
Jud Long
(@v-hull)
Trusted Member
Joined: 14 years ago
Posts: 68
Topic starter  

Thanks for the replies guys. The wind on leaders on my 50's are currently 100 lb mono. I'll play with the Palomar knot a bit more and will also give the offshore swivel knot a try . I was concerned it wouldn't work well with all the twists in that heavy line. I will also take a look at the uni knot. I've only ever seen that used for joining two lines together. Thanks again for all the input.



   
ReplyQuote
Share: