SWC Forums

Pull up a chair...let's talk fishing.

Made in USA,
 
Notifications
Clear all

Made in USA,

6 Posts
5 Users
0 Reactions
18.6 K Views
Frank Smith
(@wildcard)
Noble Member
Joined: 17 years ago
Posts: 1573
Topic starter   [#47916]

I have always been a big fan of buying better made in the USA, instead of cheaper somewhere else. That said I would like to share my latest affirmation of my opinion. I have been using "Hal-Lock" halyard locks for the last many years. I figured with time of use in the sun and salt water, that the elements would take their toll eventually. Yes they do wear over time and need some attention, but we use them on every line hanging in the riggers and center rigger. I had a problem recently with the rubber vulcanized on the sheeves coming apart. So I made a phone call not to complain, but to let them know there was a "new to me" issue. I have never had any contact with the Company before, because I had always bought them through the Dealers they had set up. I have to say I was expecting a very brief conversation with someone that spoke very weak English, so pretty much made my mind up to be prepared. I WAS NOT prepared for what came after the person picked up the phone. She spoke "by God" perfect English, with a slight Southern accent and she was the daughter of the inventor and owner of the Company! I told her about the many years of using their single, double and triple halyard locks. She was such a delight, telling me about how her father came up with this very simple, but very useful product. She told me that there was a foul up on one of the suppliers that made the sheeves for them in the Vulcanization process. Not only did she not back away from the flaw, she made an extremely generous fix to my problem that arrived two days later. I didn't ask her for a thing, all she wanted to do was to keep one of her long time customers more than satisfied. She did that four times over, all without the "if you want to hear your call in English please press one"! I have to admit I'm not your average Joe when jt comes to fishing gear, I don't like any maybe's and won't cut corners. Did I mention they are located (her and her Dad) in the Ozarks of MO? My faith has been restored, the American Dream is still rock solid!
I have to also mention I recieved almost the same exact results a few years back from Mr. Lev Huntington, owner of Drone Spoons (made right here in the good old US of A). His Grandfather hammered out the first one by hand, decades ago. Care to guess how many boxes of Drone Spoons I have used successfully? I have hope folks, I have hope.



   
Quote
Dave Arnold
(@)
Noble Member
Joined: 19 years ago
Posts: 842
 

Good for them and good for you for sharing. Thanks. By the way I just had a mason in Morehead City estimate some work and then told me as he was working on the job that it was going to be easier and cheaper than his estimate by about 25% and billed me 25% less. I had already accepted his estimate. The really good ones are still out there and there are a lot of them.



   
ReplyQuote
Jeff Schmucker
(@rustyone)
Noble Member
Joined: 16 years ago
Posts: 951
 

I have a list of similar experiences. My favorite is Lund Boats. Bought a used one years ago. After about 3 months of use, one of the recessed cup grabs for the in-deck storage boxes/live wells broke. Looked online and couldn't find one that fit.

In desparation, I called the factory in Minnesota (pre-Brunswick). The gal that answered the phone asked how she could help. I told her my story. She asked for my phone # and address and said "we'll have news for you tomorrow". I thought it was a polite way to blow me off but decided to wait a day or 2. The next day FED EX drives up with a package from Lund with not one but 14 cup grabs and a simple note attached that said " we try to build things that won't break, thanks for being a customer".

If Lund built a 35 foot offshore express I'd own one!!!



   
ReplyQuote
Jay Childress
(@)
Reputable Member
Joined: 19 years ago
Posts: 340
 

Nice to know something is still made in USA



   
ReplyQuote
GetdaGaff
(@getdagaff)
Noble Member
Joined: 20 years ago
Posts: 930
 

Thanks for the post Frank ... I love good news and rarely see it in print, on line, or through the air ... :wtg:



   
ReplyQuote
Frank Smith
(@wildcard)
Noble Member
Joined: 17 years ago
Posts: 1573
Topic starter  

Thanks for the post Frank ... I love good news and rarely see it in print, on line, or through the air ... :wtg:

I'm afraid we are showing our cynical age, I posted it up just as much for me. Sad state of affairs this generation is just accepting. Obviouly, just my opinion.



   
ReplyQuote
Share: