SWC Forums
Pull up a chair...let's talk fishing.
Capt Willie gave me an old umbrella rig he had that looks like it has about a 1-2 oz weight in the junction of it, has 2 arms perpendicular to one another, so I've got 8 spots to tie things to, and then one more in the middle.
I bought a bunch of 7" rubber squids to affix to it (11 to be exact...1 at each of the 9 positions, plus 2 more extras coming out the middle spot (total of 3 here).
I'm concerned about tangling of it when it's used, as well as it staying under water. It looks like the squids will accomodate a lot of lead shoved in them (cavity could handle a weight with a diameter of 1 oz, probably enough length in there for 2-3 of them).
Do y'all have any advice as to how much lead (if any) I should put in each rubber squid and maybe a little guidance on how far back to drop them off the rig when putting them in place? I don't plan on putting hooks in any of them, this is just (hopefully) a fish-raiser.
your dredge is small and should not require a bunch of weight to keep down. Is start with a 24 oz trolling weight in front and go from there if you have to. Put a matching squid over the tow weight. I would not put overly heavy weigths in the squids as i think they will swing more and have a tendency to tangle more, my .02. Put chafe protection on all of the connecitons of the tow rope as they tend to get a lot of abuse at the connections. How far from the boat depends on your speed, wake and where you tow if from. If you are using a cleat, make your tow line a little longer at first and you can cleat it off at the point you think it looks good and is running properly.
Im sure others will chime in...
that came out really nice!
thanks.
I think it "looks" nice, but i'm holding out a final opinion until I see how it swims. I put a 0.25 oz worm weight in each squid (loaded them backwards so they'd be less likely to pull through) and used 80 lb mono. The outside squids are dropped back 8", the inside ones 12", and the center line is at roughly 6", 10", and 15".
