SWC Forums
Pull up a chair...let's talk fishing.
Looking at a used boat (2006) with low miles on motors (less than 200 hours). They are twin Yamaha 150's. What should I be asking, looking at, checking? I'm not a mechanic so big maintenance requirements would not be good for me.
they should be able to crank them. If not on a boat, take them to a shop and they can hook them up and run them. Make sure to get a compression test done.
You need to get a good reputable Yamaha mechanic to look at the engines and do all of the testing. He will know what to look for.
What larry said ^^. Pick a good mechanic to test them (I recommend Saltwater marine if boat is near wilm/cb). The F150s are reliable motors, at least thru the 600hours I put on a pair. Make sure the previous owner kept up with the maintenance, ask where he took it for service (they may have records).
Good luck on ur find!
they should be able to hook up the diagnostic computer and get all the history off the engines. tells you how hard the motors have been ran (tells you how many hours engines were run in each rpm range) in addition to any error codes that popped up along the way.
If there hpdi. The vst filters are expensive and were most of the problems I have had with my motors. I agree with a Good yamaha mechanical looking them over. And comp check Simple things will cause big problems. Another thing is the 2 Micron screens in the high pressure pump if the crap gets past the vst canister can cause major fuel problems. Just speaking from experience. Hope it helps. Ed.
All good advice above.
I would add to pressure test the lower unit for leaks, or seal failures.
Good Luck
If 4 strokes you will want a "Leak Down" test performed.