SWC Forums

Pull up a chair...let's talk fishing.

Pin Rig Wire
 
Notifications
Clear all

Pin Rig Wire

3 Posts
3 Users
0 Reactions
11.2 K Views
Adam Parchman
(@)
Reputable Member
Joined: 11 years ago
Posts: 193
Topic starter   [#46817]

I want to thread my hooks with wire to help reduce the kings chewing thru the mono hook loop on my ballyhoo pin rigs for mahi. I don't want to switch over to full wire, just reinforce the loop. I understand I need a larger crimp to accommodate the increased wire diameter, what size crimp and wire would you recommend for use with 100lb mono and 7/0 hook?



   
Quote
Trampas Gray
(@gillraker)
Estimable Member
Joined: 13 years ago
Posts: 131
 

I use a double barrel 1.6 copper crimp with #12 stainless wire for the loop



   
ReplyQuote
reelstripper
(@reelstripper)
Trusted Member
Joined: 21 years ago
Posts: 59
 

I use #8 or #9 for my pin rigs. They are less apt to break after they are hit several times by a mahi thrashing all of over the place. Make sure you trim the pin rig as short as possible. Too many people leave it way to long and it does nothing but snag grass and leave a bubble trail. If your not already, do your self a favor and use a rubberband to rig your ballyhoo instead of a spring. The rubberband will break before it breaks your pin rig usually where a spring will usually break your pin rig. Save time rerigging during battle! A 1.3 should work but you may have to bump up to a 1.6. The diameter on various brands of mono could affect the crimp size.



   
ReplyQuote
Share: