SWC Forums
Pull up a chair...let's talk fishing.
Can someone help me understand how much line to use to pull a planer? I have looked at the depth charts and see where the different sizes will run at different depths but it I am confused. Based on the information, the planer will sink @ 1 foot for every 2 foot of line out. I get that. But if I put a #1 sea striker planer out for spanish, the chart says @ 10’ max depth. So do I only put it 20’ behind the boat? What happens if I want it further back say 50’? Will it max out at 10’ deep or will the rule of diminishing return kick in and it actually run shallower?
I’m asking as I want to pull 2 high speed planers on the cleats while mahi fishing instead of my downriggers. Just trying to get my tether lines rigged so I can pull 1 around 25-30’ and the other 50’ or so. I’m thinking with those I will need 1 around 50-60’ and the other around 80-90’.
I'd recommend an inline cigar weight instead of planer 2
Personally I don't pull planers offshore ,use weights ,
What size weights would be needed to get to these depths and how much leader would be needed behind the weight? I assuming these would be in line and not on a cleat.
Please define 'high speed'?
Anything over about 12-14 knots needs a lot of weight to keep the lure just under the surface 'high-speed' fishing for wahoo. When we high speed the heaviest weight is close to the boat and the lighter weights go further back.
What size weights would be needed to get to these depths and how much leader would be needed behind the weight? I assuming these would be in line and not on a cleat.
Edited. Double by mistake