SWC Forums
Pull up a chair...let's talk fishing.
I have heard a lot about planer rods lately. What size planer are most of you pulling? I have a #8 planer that I want to try without cleating the "poor man's downrigger" set up. I have a 50W with 50lb. mono on an 50-80lb. rod w/ rollers.
I don't know for sure but I bet ur going to have trouble holding a number 8. I use an 80wide and bent butt rod. I'm not saying you can't but I think you will have trouble.
A 50 should be fine. I think you'll reach trouble with a 12 and 16 size. That rod would be fine as long as it is on a bent but. I wouldn't try it on a stand up rod. Might want to change the mono out to heavier mono or better yet braid. There will be ALOT of drag on that reel and a lot of tension. Best thing to do is get out and try it. If it doesn't work move on to the next step. You'll probably get ALOT of opinions as well on this. I truly recommend to just get out and do it. I believe the best thing is just to get a bait down under the water somewhere. We have caught just as many fish on a 4 and 6 planer as anything else.
You guys do realize that 80's and 50's have the same drag specs right? The 50 lb mono is what I would be worried about. I used to fish a guy who used a non bent butt, shimano 50 LRS all the time without a problem. He caught hell out of big wahoo too.