SWC Forums

Pull up a chair...let's talk fishing.

Planer Rod Drag Set...
 
Notifications
Clear all

Planer Rod Drag Settings

2 Posts
2 Users
0 Reactions
4,311 Views
Brandon DeLong
(@billhunter22)
Estimable Member
Joined: 14 years ago
Posts: 126
Topic starter   [#36375]

Saturday the planer tripped and a hoo took out 30lbs of drag for a bit, backed off the drag slightly and basically winched this hoo to the boat in under 7 minutes. It comes to the surface and its a pig, I gaff this thing and he's still pretty fresh because of the short fight, and with only one gaff I manage to get this 60 lber in the boat. (I take note, should probably back off the drag a little more so the fish isn't so fresh)

Catch couple more hoo's with slightly lighter drag and then the 4th one is another good fish. I back off the drag more then I did on the first, get the fish close to a gaff shot and he makes one more run and goes right under the boat and line gets cut off in the prop.

How much do you back off the drag after a strike on the planer rod?



   
Quote
Bryan Hunt
(@)
Prominent Member
Joined: 18 years ago
Posts: 628
 

Approx 50 lbs of drag at the back edge of the black button "strike" position on a tiagra 80. This still allows me true free spool to trip and hold up to a #32, #24, #16, #12 old salty. May have to push lever past button a lil bit in a following sea or at faster than normal trolling speeds to hold planer and let it barely creep out while fishing.When I get bit, I take a few cranks to take up any slack if the fish runs to the boat, THEN IMMEDIATELY BACK OFF THE DRAG about half way to free spool.

I have seen and unfortunately experienced some nice fish snapping wire leader at the loop or at the haywire on #8 and #9 piano by not backing off the drag quick enough. I also like to keep the drag backed while snapping or unsnapping the planer to the bridle. Have killed right many fish while doing this. ๐Ÿ˜†



   
ReplyQuote
Share: