SWC Forums

Pull up a chair...let's talk fishing.

Pursuit 3000.
 
Notifications
Clear all

Pursuit 3000.

6 Posts
3 Users
0 Reactions
20.3 K Views
tracy
(@)
Estimable Member
Joined: 14 years ago
Posts: 105
Topic starter   [#55685]

I'm thinking about buying a 97 Pursuit 3000 with inboard diesels. I'm just curious about the handling and ride quality on a not-so-perfect day. Like the short window days when the fishing is good and you stay too long and have to ride home slow and sloppy



   
Quote
Jeff Schmucker
(@rustyone)
Noble Member
Joined: 16 years ago
Posts: 951
 

Brand and size of the diesels?



   
ReplyQuote
tracy
(@)
Estimable Member
Joined: 14 years ago
Posts: 105
Topic starter  

Volvo Penta KAMD 42.'s 230 HP each. I know, sound kinda small.



   
ReplyQuote
Jeff Schmucker
(@rustyone)
Noble Member
Joined: 16 years ago
Posts: 951
 

Those are a little small but geared and propped correctly they’re manageable. Biggest concern would be if you can get maximum RPM at WOT on a fully loaded boat (fuel, water, ice, gear and crew). If not, the engines have been “lugging” and nothing wears a diesel faster than lugging. Also, you want some response in reserve so when you’re running in a hard following sea you can avoid surfing the wave which will get you into trouble faster than just about anything else you can do in that boat.

Up until 2001 the bow on the 3000 was kinda blunt and didn’t do well in a head sea much above 3.0 ft. Like every boat made, pick your days and they’re all great.

Last comment; the rubber flaps that cover the scupper drains in the cockpit corners need to be very flexible and the lazarett deck hatch gaskets need to seal tightly. If not, and your bottom fishing on a rough day, a LOT of water can come in. However, a Pursuit 3000 will still float when it’s 1/2 full of water :eew:



   
ReplyQuote
Stuart Ussery
(@lookintohookem)
Honorable Member
Joined: 13 years ago
Posts: 701
 

Those are a little small but geared and propped correctly they’re manageable. Biggest concern would be if you can get maximum RPM at WOT on a fully loaded boat (fuel, water, ice, gear and crew). If not, the engines have been “lugging” and nothing wears a diesel faster than lugging. Also, you want some response in reserve so when you’re running in a hard following sea you can avoid surfing the wave which will get you into trouble faster than just about anything else you can do in that boat.

Up until 2001 the bow on the 3000 was kinda blunt and didn’t do well in a head sea much above 3.0 ft. Like every boat made, pick your days and they’re all great.

Last comment; the rubber flaps that cover the scupper drains in the cockpit corners need to be very flexible and the lazarett deck hatch gaskets need to seal tightly. If not, and your bottom fishing on a rough day, a LOT of water can come in. However, a Pursuit 3000 will still float when it’s 1/2 full of water :eew:

:lmao: :lmao: :lmao: The man speaks the truth.....they will float 1/2 full of water and make it back into MHC! :wtg: :wtg: :wtg:



   
ReplyQuote
tracy
(@)
Estimable Member
Joined: 14 years ago
Posts: 105
Topic starter  

rusty one, you hit the nail on the head. Ive never been on a boat in this size range that liked a head sea much over 3. I did notice the flappers, there spot on and Ill double check the hatches when I back down that way. As far as engines and props go, I'm pretty good with all things mechanical and going by what the current owner and my own research are telling me, I think he has done a good job with props. He has the service records for the last 14 years which my engine guru is studying. Im gonna try to sink the damn thing during the sea trial and if we don't die, ( if I go, You go, kinda thing) Ill get engine and hull survey are done and go from there.



   
ReplyQuote
Share: