SWC Forums
Pull up a chair...let's talk fishing.
Has anyone used a DYI roll-on type bed liner on your boat floor or deck? I'm thinking about coating the floor on my skiff. All the products I have looked at have both good and bad reviews depending on which site you look at. Any first hand info would be helpful!
It is all about the prep.
Prep it right and it will adhere correctly.
I used the duplicolor bedliner kit on the floors in my jeep and it worked well and never peeled or anything.
I used a product called grizzly grip on my cockpit floor of my sportfisher about 3 years ago. It has taken a beating with all the traffic across it and 1 lb weights dropped on it. I will either retouch it this year or redo it coming up.
I used Durabak on my Grizzly and have been pleased. Good grip and won't burn the tar out of your feet in the summer.
Sand, scuff and acetone the crap out of your deck. The more irregularities in the surface, the better. Show us some pics. Good luck.
I used the TuffCoat from BassPro on a BassTracker aluminum boat before with great results. Prep it properly and follow all instructions. I used an etching primer since i was going on aluminum. I also used a hopper for spraying textured ceilings. I will see if I can find some pics and post them.