SWC Forums
Pull up a chair...let's talk fishing.
I am not a file-o-phile, so is there a particular style, or #, that you recommend for hooks?
8" or 10" flat mill file single Bastard cut. If you can find the black ones get those.. Don't rust as bad.
I buy the 8 inch black bastard files at Sears.
anybody use the diamond files mounted on plastic handles? Not too expensive and mine hasn't rusted yet.
I use the Sears one and some others as well. When offshore I got a berkley electric to put a quick point on them. It's works really well surprisingly. Just have to be careful with it though it will take a point off just as quick as it puts one on
... Sounds like I may be doing it wrong... I've made up several rigs. Put them in plastic bags and seal with my vacuum sealer (but don't vacuum).
I don't use all the rigs I've made, so they stay in the bags until ready to use... Sounds like I may need to put a file on them when I bring them out of the bag... yes?
"Stew"
I am going to start sharpening my hooks with something. I was so mad last Saturday after pulling hooks on a 30+ king that I swore I was going straight home and buy a dremel. That may be overkill but I had enough.
AND don't sharpen your hooks anywhere over any type of finished fiberglass on your boat :wtg:
AND don't sharpen your hooks anywhere over any type of finished fiberglass on your boat :wtg:
Care to elaborate.
AND don't sharpen your hooks anywhere over any type of finished fiberglass on your boat :wtg:
Care to elaborate.
You will start to see rust spots in the fiberglass where the fine metal shavings from the file is dropping and embedding itself. It is tough to get out.
From a mate's point of view.......it creates hard work in your future.
Thanks for that!
