SWC Forums
Pull up a chair...let's talk fishing.
I am looking for some pictures of the gear set in place and will post them when I find them.
The last I heard, rec traps have to be made from no less than 5/8" bar/ 1 1/4" stretch - meaning the grid on the mesh is 5/8" apart center to center or if stretched diagonally 1 1/4" center of knot to center of knot. I have found that if you use mesh that is only 1/2" wide you keep too many small shrimp. With the 5/8 the smallest that stay in are in the mid 50 count, with 1/2 you get into the 70's.
Rec leads can be no longer than 10'. The sets must be marked with a pink buoy and be attended at all times. ATTENDANCE is one of the biggest problem. When shrimp are left in the trap you start catching everything - grouper, spots, crabs etc...... Every year I see more and more unattended rec gear that is nothing more than a killing machine.
I feel the same as ECS... why not allow folks to use gear such as this and fly nets along the edge in the waterway (with little or no by-catch) and "bottom friendly".
Makes no sense to me to hold back good ideas like this with a better ROI (fuel, effort,wear and tear on your motor, etc...) and less impact on the bottom.
Then again MFC never claimed to be intereted in protecting the small operation fisherman or the resource, their primary interest is the fleet of big Pamlico Sound draggers.
Don't create a better mouse trap that is more cost effective, or brings a better quality shrimp to the market place from the small operation shrimper. Let's study this a few years, hopefully this "inventor" will have gone out of business and we won't have to deal with him then. That is the mentallity of our current MFC, who gives marching orders to our current DMF
At least one (more like 3) of the commisioners of the MFC has a vested interest in this big otterdoor style Pamlico Sound shrimping.
Let's take a minute to think about our current system overall... Is it really working for the citizens and small operation comm fisherman, or is it biased towards the large scale operation that is "fish house freindly" only ???
Take the striper fiasco, this is a perfect example of what I am talking about
This has been going on for several years now with NO ACTION from MFC, because it would put a hick-up in the "business as usual" .
Just speaking for myself, I think it's time we start discussing "life after" our current MFC/, who will run it, and what it will look like.
Any update on what the status of these shrimp traps are and available for sale?
Not much has changed, check the regs. Basically for recreational you need a RCGL and cannot use leads unless you are there with it. Commercial still needs a shrimp pound permit. Not sure where to tell you to get your traps other than J&D Crab Pots in Sneads Ferry
RCGL Shrimp Pound
(Effective April 1, 2009)
Gear Requirements – One pound used to take shrimp. Each lead must be 10 feet in length or less with a minimum mesh size of 1 ½ inches. Enclosures are to be constructed of stretched mesh of 1 ¼ inches or greater and all dimensions must be 36 inches or less.
Attendance – Shrimp pounds must be attended at all times and must be removed from the water when not being fished.
Marking Requirements – one floating buoy any shade of hot pink (see Buoy Requirements) attached to the offshore lead of the pound.
Distance Requirement – A RCGL shrimp pound must not be set within 100 yards of another RCGL shrimp pound or within 300 yards of an operational commercially permitted pound.
Shrimp Possession Limit
48 qts. (heads on) 30 qts. (heads off) one RCGL holder aboard vessel
96 qts. (heads on) 60 qts. (heads off) more than one RCGL holder aboard vessel
<BACK to RCGL page
If I'm reading this right a recreational fisherman can set a couple of these in the water and catch shrimp or am I reading this wrong? I love me some shrimp lol
You have to have a recreational commercial gear license and I read the gear requirements as one only. This is copied directly from the NCDMF webpage.