SWC Forums
Pull up a chair...let's talk fishing.
Wondering if anyone has a Simrad evo2 with the transom mounted broadband/downscan transducer and can post some performance opinions. Not only how good are the pics, but to what depths they work to in real life. I generally troll at the break and bottom fish inside 200 ft.
Price wise, looking at two NSS7, or a single NSS9. Maybe step up to a single NSS12. Any gains/losses of one large screen or two smaller ones? Simultaneous CHIRP and downscan??
I've got the nss 7 evo2 with 83/200 downscan ducer. The most i've seen is about 110 feet, and it gave decent detailed bottom pic at that depth. I did not try the structure at this depth, but i use the downscan alot between 30-70 feet fishing on reefs, rocks, etc. I was using it last weekend fishing on a wreck, and it looked almost 3d on my downscan, you could see the whole bow of the wreck. Now with that being said, i wish i had a chirp ducer for regular echo. But the problem is i wanted downscan too, and did not want to put 2 ducers on my boat. So i just had to settle for the mediocre echo, because i really wanted the downscan. Now if i had to do it all over again, i would have forked out more money to get the 50/200 downscan ducer. I think this might give me better echo images in deeper water. Hope this helps.
I went with 2 nss 7's, because it was cheaper to get them than one 9 inch. I am really really glad i did, it is so much nicer having two units. I can move things around how i want them, gps on one, echo on other, or echo on one, then downscan on other. The options are endless. I also have them networked with my motor (instant fuel burn, mpg, engine temp, trim, etc. etc.) and simrad vhf.
Interesting....they only had 9 and 16 to play with at west marine, and I was thinking no way I wanted anything smaller than the 9. And 2 9's being more expensive than a single 12...well that that has me leaning towards just a single 12. of course I could add another screen later....
Yea, I went with a NSS7 in upper station and a NSS 12 in lower station in 2013 and a chirp ducer and broadband box. 1000K transducer. Although, I think this year the install rep finally got things right with software, I had many many issues from the get go. Spent a boatload for the whole setup. Truely disappointed. Saw those IntotheBlue TV guys with the setups and was sorry I believed them. If I had to do it again I would have gone Garmin.
Sorry, I missed half your question. The downscan is good with CHIRP but I don't see too much baitfish detail over 100' deep water (I am afraid to get the software updated so maybe it gets better?) I grouper fish a lot so the side and downscan had me all excited. Sidescan is mostly for around 40' or shallower water. You would probably be safe to say I purchased this equipment when Simrad was still in the debug phase of their software so I am a bit opinionated.
They are still having software issues. I am on the fence of Simrad, Lowrance (both navico) and Garmin. All three are having issues. Just going to take some time to get it all correct. If you have, I would wait a couple of days before installing the latest updates and watch on thehulltruth.com. Many units that were working fine go DOA with the new updates on all three. Trying to test drive all three in real world fishing conditions before making a decision.
I know simrad had an update a couple weeks ago, I have yet to install it. Is this the update you are referring to? My units currently work great with no issues.
I know simrad had an update a couple weeks ago, I have yet to install it. Is this the update you are referring to? My units currently work great with no issues.
Yes. From what I read that some were have problems with reading temperature or sidescan on the Simrad units. The last update fixed some, and messed up some units that were working fine. Go to thehulltruth.com under marine electronics forum and search simrad. They all are having some issues with a few units while others are working great. Just don't want to plop down several thousand and then have a nonworking unit. Or have a working unit, do an update and have issues. All the mfgs. will get it all sorted out eventually. The lowrance are having black screen issues where the unit powers up but doesnt light up. Some are overheating but most just black screen with a software issue. Garmin 76xvs is having issues reading bottom in shallow depths on some units and radar on others. Its crazy that an update is messing up units that were working well.
I would be a little bit more than pissed if I was a charter captain and just dropped $15k on two units that did not work in my busy season. Think I am going to replace one and keep my 4212 as a backup.
I have nss 12 at lower and nss 7 at upper. the nss 12 spoils you, wish I had gone bigger than the 7 up stairs, but both good units. I have no experience with the nss 9, but I wish I had one up top instead of the nss7. I have never had to read the user manual. Units are very simple to operate.
I know simrad had an update a couple weeks ago, I have yet to install it. Is this the update you are referring to? My units currently work great with no issues.
Yes. From what I read that some were have problems with reading temperature or sidescan on the Simrad units. The last update fixed some, and messed up some units that were working fine. Go to thehulltruth.com under marine electronics forum and search simrad. They all are having some issues with a few units while others are working great. Just don't want to plop down several thousand and then have a nonworking unit. Or have a working unit, do an update and have issues. All the mfgs. will get it all sorted out eventually. The lowrance are having black screen issues where the unit powers up but doesnt light up. Some are overheating but most just black screen with a software issue. Garmin 76xvs is having issues reading bottom in shallow depths on some units and radar on others. Its crazy that an update is messing up units that were working well.
I would be a little bit more than pissed if I was a charter captain and just dropped $15k on two units that did not work in my busy season. Think I am going to replace one and keep my 4212 as a backup.
Furuno.
I won't be pulling the trigger until fall fishing is done. Also adding an autopilot so there is a whole package consideration there too. Current plan is to go all simrad. Playing with one at west marine, I was amazed at how easy it was to use. Five years with my C80 and I'm still fumbling looking for infrequently used features.
I installed a full Simrad package last fall including 2 NSS12 EVO2 screens, Airmar B175 HW chirp and LSS2 structurescan ducers, 4G radar, AP 2403 autopilot package, Sonichub with Sirius WM-3 & fusion wired remote, and GoFree WiFi. I had the same troubles as many others with occasional boot failures and no temp readings from the B175 HW but these were minor problems and they have now all been taken care of with the latest software update. I have never been able to get the structurescan to perform very well (probably operator error) but the B175HW transducer is awesome. I haven't been beyond about 300' but fantastic resolution up to that depth. I never loose depth readings up to 50+ mph and I can easily see bottom structure @ 30 +. Overall it's an awesome system and still learning how to use all of it's capabilities.
I have a NSS12 that replaced a Garmin 5212 and like it a lot more.