SWC Forums
Pull up a chair...let's talk fishing.
Fellow Boater:
In the past few weeks we have seen 2 vessels take on water. One is a total loss and the other is being evaluated.
My point, check all the through hull fittings, hoses and any sea cocks to ensure they are up to par. Double check your work, make sure everything is completed correctly and if you are not sure, hire a reputable marine technician to complete the work correctly.
Be safe out there, make sure your vessel is up to the tasks we ask of them. A simple through hull fitting can lead to a very bad day.
Regards,
Scott
Scott
What's the best way to check? Go ahead and float it for a quick dip and Check?
Do you think maybe the dry stack ones, the sealants freeze and crack?
I keep reading all these posts about all the what ifs and its about to run me crazy
Reznor,
Great questions.
Dry storage vessels, trailer included, sure. Putm in the water, let it sit for a bit. Older vessels would imo require more attention. Just being proactive will go a long way. In my short time at IWYC I've seen enough to make me even question my 2012. Always checking each time I put in. It ddoesn't take long to pull a hatch cover and peak in the bilge. Simple precautions go a long way. IMO the what ifs can be checked very easily. We, myself included, are always in a hurry. LET'S FISH! load the boat and go. Meanwhile a quick check could yield a leak and save the day.
1. Check through hull fittings. Constantly.
2. Check sea cocks and valves. Open and close them frequently.
3. Make sure your bilge is clean. I've seen some interesting stuff come out of drain plug holes.
4. If you aren't sure of all the above, hire a professional to check these critical points.
5. Run your bilge pump. I'll put the hose in there before and after a trip and let it kick on to clean it out.
I'm sure there is plenty I'm leaving out. Let'shear from everyone on this.
Great tips, will see you down there Friday for maintenance if you're around.
I would like to add to make sure to thoroughly check your fuel hoses. At some point between storage in 2013 and launch in 2014 my fill hose deteriorated to the point of filling my bilge with a few gallons. The part I could see/inspected was fine, below deck was shot.
Hoping for no surprises this year!
