SWC Forums
Pull up a chair...let's talk fishing.
Sorta interested in trying some sword fishing this year. I know very little about it, other than what I've seen on youtube and read. Don't want to spend a fortune on an electric outfit and was wondering if an penn 12/0 with a fishwinch or similar electric unit be sufficient? Would double as a deep drop for tiles, grouper, etc. Of course it would be on a bent butt and stay in a rod holder. I've got one fish winch unit already that I bought for my dad to use while bottom fishing and it seems to work well and they have some new units out now with higher torque and retrieval rates. I also have a couple of TLD 50 two speeds that I could put a unit on. Just looking for knowledgeable opinions and if it is worth it.
I'm not familiar with the fish winch, but the concern is overheating during a long fight, and with that style electric you don't have the handle available for when it does. Thats why power assist types are the most popular. I know a TB1000 and it's various clones are marginal for swords. The hooker is the best, but obviously $$$$$.
I’ll be trying it this year too. I’m starting with an Electra Mate 620xp but I have a feeling I’ll be switching to something heavier duty if I decide to stick with it.
daytime dropping is expensive for sure. I do a lot of it down south and won't fish for anything else on a flat day out of pb, but we only run 16-20 miles to the fishing grounds. 90 miles out of mbi is a haul and i haven't felt the urge to run that far when up in NC.
There're plenty of fish out there from what i hear, and they will bite just about anything that swims right with the little fishing pressure.
Obviously the LP-S1200 is the mac daddy of sword reels followed by the hooker. I've used both and nothing compares to the LP in my opinion. Those mp3000 can be bought cheap now (2k or so); they work ok. Very slow and have heard of a couple burn out. I use the tanacoms for grouper fishing and my kite reels. The drag is terrible and i would never recommend it for swording, not to mention you will eventually burn out the motor.
If you're going to burn the fuel and time for a 300 mile round trip, invest in an electric. If you're manual fishing, you're going to waste half the day away by cranking up to check the bait.
The reel is really something to consider, but the rod is equally if not more important! I don't want to know how many fish i missed from using a broom stick when i started fishing for them.
I could go on forever about the topic. Feel free to pm me
Yeah those reels are expensive. I should of never got started offshore fishing and stuck with bream fishing ponds.
Save yourself the aggravation & hire Merry Marlin Fishing.
Jacky & Patrick have it dialed in. Check out their Facebook..... ICM
x 2 on bream fishing - lol
bobbers and crickets - those were the days !!!
The thing about trying to start out with marginal at best equipment (and I have no experience with the fish winch so I'm not sure what the capabilities are, but I'd be shocked if they were designed to handle a swordfish fight) is that you could get heartbroken. Couple years ago, guys out of Ocean Isle went and on their very first day going, caught a 400+ pounder. They were using a TB1000 (because they already had one) and it overheated several times during the 4+ hour fight, but because it has a handle, they could hand crank until it cooled down. They went out and bought a Hooker afterwards. The TB1000 also overheated on a 150 class fish on another boat the same day. I'd sure hate to lose the fish of a lifetime due to inferior equipment. So think long and hard about if this is something you want to do on a regular basis. The runs are long and if you don't think its something you would do on a regular basis, probably better to just charter Merry Marlin once a year or something. You don't want to spend $300 or $400 on something, then realize it won't get the job done. The other thing ks, what are you going to do with an electric 12/0 if you decide you like the fishery and want to do it right by getting an LP or Hooker? Then you have $400+ sitting in the garage. Get the right gear the first time.
Yeah those reels are expensive. I should of never got started offshore fishing and stuck with bream fishing ponds.
So well said....
Save yourself the aggravation & hire Merry Marlin Fishing.
Jacky & Patrick have it dialed in. Check out their Facebook..... ICM
Yeah, I watched them. Those guys are killer fishermen. May have to look them up. :wtg: