SWC Forums
Pull up a chair...let's talk fishing.
My outriggers have a lot of side to side play. So much that I will not even run with them extended. How can I fix that??
Mine got to where I could hardly move them anymore. I removed them from the boat and rebuilt them, lots of built up salt on the inside. Sounds like a different problem from yours but they are not too hard to take apart and clean.
The poles or the bases?
If they are GS280's, there is a bolt on the underside inside the base tube. Pry the cover off the bottom and remove the handle to access the bolt. Tighten it down (9/16 I think)
I think the problem is in the base. They are only 3 months old. It is almost like something is loose, but I don't see anything to tighten other than the 4 mounting screws that hold it to the t-top, and that is not where the play is coming from, it seems internal on the base
Tighten the bolt, maybe add lock-tite, refer to my other post.
I appreciate the info.
rdu, do you run with yours extended, facing the rear of the boat? I have heard some say that they are designed to handle that and some say they are not. I do have the GS280's, same as you
I do if the seas allow, it is a lot of stress on the components if its rough. I switched to Marsh Tacky 17' Carbons this year...a lot lighter
I have Taco the Grand Slam too and I run with mine up all the time. 8 years and I haven't had a problem. Hope I didn't jinx myself. :wall:
I have the 370s but I know plenty of guys running 280s and run with riggers extended all the time. A pair of Marsh Tacky carbon riggers would be even better up there and a lot less stress too
rdu, you were right on the money. Both sides needed it and Taco suggest that you do it every 6 months. Thanks for the info!!