SWC Forums

Pull up a chair...let's talk fishing.

VC PERFORMANCE EPOX...
 
Notifications
Clear all

VC PERFORMANCE EPOXY

8 Posts
5 Users
0 Reactions
7,536 Views
JOHNNY CARPENTER
(@)
Noble Member
Joined: 14 years ago
Posts: 1169
Topic starter   [#36700]

Sent my boat away yesterday to have the old, flaking bottom paint removed
and VC Performance epoxy put on the bottom. Got my fingers crossed on how it comes out. Read a lot and decided that since I trailer my boat this seems like a good option. Anyone out there got it on their boat? Pros and
cons welcome.



   
Quote
Bryan Williams
(@squid)
Estimable Member
Joined: 22 years ago
Posts: 160
 

Wish you would have posted this before you sent it off....I too trailer my boat and had the old crappy paint blasted off this spring. Went back with a paint that my friend Adam Brown of Greenway Coatings Removal found....its also an epoxy but can be made to any color you want. VC is only available in white as you know. The stuff we used has a 10 year warranty and we have been EXTREMELY impressed with it so far! Below is a picture of how mine turned out.




   
ReplyQuote
JOHNNY CARPENTER
(@)
Noble Member
Joined: 14 years ago
Posts: 1169
Topic starter  

Wish you would have posted this before you sent it off....I too trailer my boat and had the old crappy paint blasted off this spring. Went back with a paint that my friend Adam Brown of Greenway Coatings Removal found....its also an epoxy but can be made to any color you want. VC is only available in white as you know. The stuff we used has a 10 year warranty and we have been EXTREMELY impressed with it so far! Below is a picture of how mine turned out.

<a></a><br><span></span>

Thanks, Think I'm going to paint the rest of the boat white anyways as it is
an ugly yellowish white at this point. Will probably add a black boot stripe as well.



   
ReplyQuote
Mike
 Mike
(@baytro23)
Honorable Member
Joined: 18 years ago
Posts: 681
 

I stripped my flaking bottom 2 yrs ago. Put 3 coats of 2000e barrier coat then 2 coats of VC Performance Epoxy. That stuff is very tough. No problems so far. I picked up 1 to 1 1/2 mph at cruise too.



   
ReplyQuote
JOHNNY CARPENTER
(@)
Noble Member
Joined: 14 years ago
Posts: 1169
Topic starter  

Went by to check on how this project is going so far and am impressed with
the work these guys have accomplished. Bottom paint has been removed
an they are sanding away the old primer coat. Bottom looks good so far,
no blistering detected. Should be proceeding with new barrier coating this
week and start painting. Excited about the new look and hope to be
able to improve my performance without the flaking bottom paint.



   
ReplyQuote
John Rakoci
(@)
Noble Member
Joined: 14 years ago
Posts: 2331
 

There is a new Regulator at the marina. Dark blue with a rust/red bottom paint. It is the only boat I've ever seen with bottom paint that I think looks very nice. The gray above looks good. All my boats were kept on the trailer or on a dry rack-- never bottom painted any.



   
ReplyQuote
(@capt_john_c)
Member Moderator
Joined: 19 years ago
Posts: 1128
 

I did the VC epoxy on my old boat because it was rack stored, and that stuff was pretty awesome. When I got the boat it was gunked up with hard anti fouling paint. I water/sand blasted it down to the gelcoat. I put on about 4 coats of the epoxy with a foam roller and then tipped it with a badger hair brush. After that was done I gave it a heavy compounding and buffing. That bottom was so slick dirt wouldn't stick to it. I could leave the boat in the water for a couple weeks and once I would bring it up on plane, the slime was gone.



   
ReplyQuote
JOHNNY CARPENTER
(@)
Noble Member
Joined: 14 years ago
Posts: 1169
Topic starter  

I know it's whiter than boat but thinking about black boot stripe.img959068_2_163.jpg



   
ReplyQuote
Share: