SWC Forums
Pull up a chair...let's talk fishing.
OKay....here's the situation. We're thinking of towing our Craigcat to Marco Island in a couple of weeks since we'll be there for 2 weeks and that would be an ideal boat for that area. The whole rig only weighs 850 lbs, so I'd like to think that it won't totally destroy my gas mileage. My biggest concern is the long haul on those little tiny tires & hubs. They seem to be in good shape, with plenty of grease....but I dang sure don't wanna be on the side of the road. I've heard of bearings that are sealed and don't need to be serviced. Anyone have any experience with those......or towing long distance on those little tires?? Any advice??
I towed a 16 ft al to the Fl keys a couple of times in the '90's. ~ a week prior to first trip I took it on I40. Turned around at Castle Hayne and opened it up headed back to Gorden Rd. Blowout! Tires had cracks like they all get - dry rot. At 70 mph those little (less than 13 inch) are turning some high RPM's. Bought two new rims and tires and carried 2 spares plus grease gun. have socket and breaker bar with you. Bearing buddies. At every stop I checked hubs for heat and would give a squirt of Greece. AND I kept it about 70 MPH on I95. Good luck!! -- glenn
If it were me, I'd pull the hubs off and either clean and regrease the bearings or replace them depending on condition. If the bearings and / or the races are pitted, replace. You can buy whole hub assemblies at Northern Tool with seals, bearings, already greased and ready to go for close to the same cost as bearings, races and seals. Cheap Chinese crap but it will get you by for a season. Check the tires good for any sign of dryrot or wear. Replace if in doubt. To me, I'd rather go through them now and know they are right before I hit the highway than potentially screw up my trip by just hoping they're good. A lot easier to address it now than on the side of the highway. My buddy had a bearing go out once headed to the coast. Ended up having to get a rollback and a motel. Cautionary tale.
These guys are giving good advice... replace now and bring spares plus tools/equipment to change out if you have an issue... I've towed to Forida twice this year with my skiff.. no issues.. but being prepared brings piece of mind.
if you have the 8 inch tires it will be a crap shoot like the guys say get a couple spares and a whole hub assembly, not that expensive. those small tires turning at 70 mph just wont hold up but so long even new. they literally sling themselves apart. you can hit a pot hole today and injure the belts in the tire and 6 months from now it might blow out sitting in your yard. just be prepared every summer these grifton guys will take a camper that has 8 year old tires and take off to charlotte for a nascar race and come by my shop to get them pumped up with a rotten spare. but as long as they have 3 coolers of beer no worries. just be prepared.
Had a bearing give out on the way back from MAD. Got a new hub with bearings from Northern Tool in Raleigh, replace and on the way. Not a big problem other than trying to change in a parking lot. Got a spare hub with bearings and seal from A.K. McCallum in Fayetteville for about $30.00 less. It will be on the truck until hopefully never needed.
Check the hub bearings and the quality of the tire . I have pulled my 16 ft aluminum boat over 600 miles a few times loaded up with house hold things.
Most trailer tires are known to be Chinese crap as well. Not sure if this applies to your rim size, but I highly recommend the Maxxis 8008 tires for your trailer. They are by far worth the investment.