SWC Forums
Pull up a chair...let's talk fishing.
Hey there,
Wanted to see if I could get some advice from those on the board about finding a trailer. I have found what I hope will be my very on boat, but she doesn't have a trailer. She is a 24 Albe express, 4800lbs dry. I am looking to get something that at a min is rated for 6500 lbs, I was just wondering if anyone could point me in the direction of some dealers or places that sell trailers.
The boat is going to spend April-September in Hatteras and then come back to Raleigh during the winter. So the trailer won't see very much use.
Any advice will be greatly appreciated!
Thanks!
Loadrite tandem axle, disc brakes, torsion bar aluminum I Beam. You may want to look at heavier than 6500#. My EdgeWater 240 cc is at 6000# boat motor and fuel. I know your hull is heavier than mine. Check their website It will give you a better idea. Good luck.
Barry
Lots of folks go cheap on a trailer and end up having problems. You do not want to be stranded on I40 with trailer problems! I would avoid anything made by Wesco. Loadrite makes fine stuff as do some others. I'd get tandem axle, Kodiak brakes, and have it rated for about 8500#.
If your situation changes and you trailer frequently, you need something top of the line. In my opinion that is Owens and Sons down in Fl. They will build you a top notch trailer that will fit your boat like a glove for a reasonable price. You can get it shipped up for not much money either.
I would avoid anything made by Wesco.
Amen brother!
I would avoid anything made by Wesco.
Amen brother!
X3. There are a couple placed in Florida. Owens being one that will probably be my next trailer. Even though it want see much use you want it ready to roll when you need it. I think 6500# is too lite as well.
Most trailers are rated GVWR, that is
total with boat on trailer. You might want
a 8000# model. They will all be tandem
w/6 lug wheels. Trailer will weigh around 1400 #'s MOL,
difference is hauling capacity.
Some "aluminum" trailers have galv. x braces,
others are all aluminum. I would look only at
trailers with a "tongue wrap", that is the I beams
are bent to caress tongue square tubing.
Several brands are built around Plant City/Tampa FL area to
include Loadmaster, TnT (Tim Nobles Trailers), Fastload,
Slideon and Ace...They all use pretty much the
same pieces.
If you can "buddy up" with a couple of friends who also need trailers,
IMO, you can really save sum bucks going to p/u at manufacturers.
After fuel and one motel stay, 2 of us saved around $3500.
Outer Banks works near Harker's Island is a big supplier of trailers to many dealers. They are great people and price their trailers right. I Have had loadmaster and several other brands, but the magic tilt trailer like I have now is the best that I've had through 40 years of boats
I would also go aluminum welded and not bolted.
Another question added to this. Is there a way to prevent the the steel hardware against the aluminum to prevent
electrolosis eating at the aluminum?
Another question added to this. Is there a way to prevent the the steel hardware against the aluminum to prevent
electrolosis eating at the aluminum?
I used the same Loadmaster for nine years,
never a problem for me. Many newer trailers
have a molded vinyl spacer between metals.
Another question added to this. Is there a way to prevent the the steel hardware against the aluminum to prevent
electrolosis eating at the aluminum?
Yes I think most companies now providing for saltwater boats put some type of barrier between the parts that touch that are different. Surprising wesco does have that!
Another question added to this. Is there a way to prevent the the steel hardware against the aluminum to prevent
electrolosis eating at the aluminum?
Yes I think most companies now providing for saltwater boats put some type of barrier between the parts that touch that are different. Surprising wesco does have that!
I agree. My Wesco is 10 y/o and I've had no complaints (once I put radials on it) but I will probably separate the dissimilar metals this year. I think it's worth the effort and minimal expense.
Ameritrail in Florida best trailer you can buy. I have also had a wesco for 10 years and just did normal trailer maintenance
Ameritrail in Florida best trailer you can buy. I have also had a wesco for 10 years and just did normal trailer maintenance
Call Mark's Marine near Greenville, 252-758-3309 and get a price. He beats anyone's price most of the time. Tell him I sent you.