SWC Forums

Pull up a chair...let's talk fishing.

trailer rides like ...
 
Notifications
Clear all

trailer rides like crap

22 Posts
14 Users
0 Reactions
23 K Views
David
(@weekend-hooker)
Prominent Member
Joined: 20 years ago
Posts: 861
 

Move de boat back till it fishtails
or move it forward till it quits fishtailing.

Hey Doug.. did you ever get that mail I sent to you're house? LOL

That's exactly what I was thinking... Then you'll be between two fish tails!
The bunks look like they're a little long for that trailer... Maybe I can't see the pic very well on my phone ... Looks like they extend a good ways past the trailer I beam?
One thing .. Make sure you're beams are level when hitched.. Adjust you're ball level to get a good 4' level zeroed on the I beam then start moving the boat where yer tounge weight is right....



   
ReplyQuote
Matt
 Matt
(@)
Famed Member
Joined: 16 years ago
Posts: 2497
 

Winch arm is all wrong, slants way too far forward. I would think that boat needs to be a good three foot back to center the weight over the tandem axles and take some weight off the tongue. I bet you have 500# of tongue weight. Your killing the suspension on your truck.



   
ReplyQuote
(@curmudgeon)
Noble Member
Joined: 21 years ago
Posts: 1317
 

I bet you have 500# of tongue weight. Your killing the suspension on your truck.

I have between 450# and 500# on my tongue, which comes to just under 10% depending on fuel load. I'm still trying to figure out what 'rides like crap' means in this situation. But before just pushing the boat around, he needs to weigh the rig on a split scale, many truck stops have 'em ... ๐Ÿ˜•



   
ReplyQuote
zigzag
(@)
Noble Member
Joined: 22 years ago
Posts: 1863
 

My 28 McKee has long bunks on it too, was going to cut them off even with the stern, got to studying on while loading, with the sharp bow of the boat without the long bunks the bow of the boat would or could hit the trailer frame loading, glad I held off on the saw.



   
ReplyQuote
ed
 ed
(@)
Honorable Member
Joined: 16 years ago
Posts: 598
Topic starter  

Well the rides like crap deal is rough ride on the truck i was thinking it needed to go back on the trailer just to make it a little better ride but wanted everyone's input before i screwed it up y'all been around and know. when i got the boat they just slid it in a new trailer and handed it over i had a proline. before this one a 23wa and it pulled like a dream. It is a good ride from lumber bridge to the coast. Thanks again guys I'm going to drag it to a scale and see what i find. wiah.i was closer to Wilmington. so i could hit where cpt. Dave said.



   
ReplyQuote
ed
 ed
(@)
Honorable Member
Joined: 16 years ago
Posts: 598
Topic starter  

Got it almost right. 6-8 inches back on the trailer it rides much better now.



   
ReplyQuote
scott Evans
(@mzbhavn)
Eminent Member
Joined: 16 years ago
Posts: 36
 

Got it almost right. 6-8 inches back on the trailer it rides much better now.

most often when you feel it on the tow vehicle it is closer to the proper tongue weight than when it is a "good ride"

Think of it this way a 1/2 ton truck is designed to carry a 1000lb load (passenger and payload) safely (check your tow capacity of specfic veh.)...15% of a 5k boat is 750lb and trust me you will/ should feel the weight of that tongue on the vehicle or your setup is wrong....best bet weigh it and get it right!



   
ReplyQuote
Page 2 / 2
Share: