SWC Forums

Pull up a chair...let's talk fishing.

Transducer question
 
Notifications
Clear all

Transducer question

8 Posts
7 Users
0 Reactions
18.7 K Views
Rodney
(@)
Estimable Member
Joined: 12 years ago
Posts: 88
Topic starter   [#46722]

I have a lowrance hds 8 gen 2. My transducer sucks. Does not read while on a plane. Am looking to put something different. I do a lot of bottom fishin in 100' of water. Any suggestions



   
Quote
Jamie Blue
(@)
Famed Member
Joined: 20 years ago
Posts: 3660
 

Navico B164 or B175 thru hull depending on if you have CHIRP or not. Not familiar with the HDS8. You want 1kW through hull.



   
ReplyQuote
Barry Turano
(@barryturano)
Famed Member
Joined: 17 years ago
Posts: 2720
 

Airmar tilted element thru hull. Protrudes about 3/8" below the hull no worries if you trailer. No cavitation issues will track at any speed.



   
ReplyQuote
george mc donald
(@)
Reputable Member
Joined: 17 years ago
Posts: 374
 

You can't beat the thru hull trans. I'm running a hummingbird SI
mounted centerline 12-14 inches in front of motor foot,, clear as crystal
at any speed and water condition. A little more pricey but worth
every penny IMO.. :wtg: :wtg:



   
ReplyQuote
Chris Morris
(@)
Estimable Member
Joined: 12 years ago
Posts: 65
 

Nobody's mentioned it but if your boat is a stepped hull you'll need to mount it in front of the first step of the hull. That's my understanding anyways. I just did an Airmar B175M on my donzi and I can read bottom at any speed.



   
ReplyQuote
Stephen Wicher
(@mppheel)
Noble Member
Joined: 15 years ago
Posts: 1008
 

I had a similar issue. The previous owner had the transducer mounted on the port side of the engine. Got it moved to starboard and it will not lose ground



   
ReplyQuote
Jamie Blue
(@)
Famed Member
Joined: 20 years ago
Posts: 3660
 

Nobody's mentioned it but if your boat is a stepped hull you'll need to mount it in front of the first step of the hull. That's my understanding anyways. I just did an Airmar B175M on my donzi and I can read bottom at any speed.

That's correct. I just assumed he wasn't running a step hull. The steps create turbulence which will mess up the transducer readings at speed.



   
ReplyQuote
jeff tyson
(@v-rod)
Estimable Member
Joined: 14 years ago
Posts: 127
 

You need a b60



   
ReplyQuote
Share: