SWC Forums

Pull up a chair...let's talk fishing.

vhf problem
 
Notifications
Clear all

vhf problem

6 Posts
5 Users
0 Reactions
21.3 K Views
tommy whitley
(@)
Noble Member
Joined: 15 years ago
Posts: 791
Topic starter   [#56221]

my vhf radio will receive but is not putting out any suggestions?



   
Quote
(@capt_dave)
Member Admin Registered
Joined: 3 years ago
Posts: 12511
 

The first place to start is cleaning the connection between the radio and the antenna wire.

Then check when you punch the button on the MIC.....does the TX light up on the screen. If NO....Then your mic is shot.

Dave



   
ReplyQuote
tommy whitley
(@)
Noble Member
Joined: 15 years ago
Posts: 791
Topic starter  

thanks Dave



   
ReplyQuote
jerry leonard
(@jerryd)
Estimable Member
Joined: 19 years ago
Posts: 116
 

Check voltage going to radio before and during transmit. Receive draws very little current, transmit draws a lot more. The fact that you can receive says the antenna is working some.



   
ReplyQuote
Dale A. Tycast
(@toad)
Prominent Member
Joined: 18 years ago
Posts: 722
 

The mic is probably shot. Had the same thing happen to mine.



   
ReplyQuote
Johnnie Sheppard
(@)
Trusted Member
Joined: 12 years ago
Posts: 41
 

I had the same problem once and turned out to be a bad battery switch. When I took it apart it flew all to pc. When it was mfg. they used screws that were about 1/4" to long. They bottomed out and caused the switch to separate but not enough to disconnect the contacts. Does your battery switch feel tight as always ? Mine got loose is how I found the problem.



   
ReplyQuote
Share: