SWC Forums
Pull up a chair...let's talk fishing.
So I have wanted to get into wahoo fishing for a while. Various reasons on why not, but mainly confidence in the motors. That has been taken care of now.
As for reels I currently have a Shimano TLD 30 and an Okuma T30. I also have several Penn Senarors in 4/0 and 6/0. From what I have been reading, those should do for a while. I have been through all of them and the drags are in good shape.
The rods that I have are in various weights and age. I have built my own live bait king rods and am planning on building some for the wahoo and hopefully yellowfin.
Since I am just starting on this , what are the recommendations for rods to use?
Fast action? Medium action?
Med-heavy power? Heavy?
50 to 80 line or 80 to 100?
Length? 6 foot or less or would 7 foot work?
I know that at least 2 should be bent butt for the rods coming off the rear holders, but what about the others?
As for the reel seats, the heavier the better I am sure. And the guides will be Heavy duty. There will be a roller stripper guide and probably a roller tip..
Just looking for suggestions because I would like to be sure I build something that will work and something that will last.
Thanks in advance.
I use a Tiagra 80W as the planer rod, it will pull a car hood and I always use a #8 planer on that one, have also used a #12. It has the short Star rod with the rollers and the swivel tip. I use Tiagra 50W's on the other 2 that I use for wahoo. 5'6" rods with rollers, 1 has a bent butt and it goes off the back of the boat opposite side of the 80W, the other is just a straight 5'6" rod set up that I pull off the rocket launcher behind the seat. These are the 3 I use for high speed trolling (no planers on high speed, just 32oz trolling weights). Make sure you have rod leashes on everything you pull for wahoo. I had heavy duty rod holders installed on the back of the boat for the bent butts and have had no issues with them. Hope this helps, tight lines
Thanks for the reply.
It gives me a good place to start.
i use this Bait King - MZFRDBK-XXXF rods , you should try this .
Thanks, I'm also using the Bait King fishing rod, very good. The drag is in good shape with my homemade lures.
https://eggycar.net eggy car