SWC Forums
Pull up a chair...let's talk fishing.
So me and a buddy head offshore today and we decide we will use channel 72 as our communication, we radio check in the inlet on the way out, I hear him fine, he hears me fine. He stops short of our destination and I continue offahore about 8 miles or so. All day he is hailing me on the radio, I can hear him fine. I reply and he is not hearing me. All other boats can hear me, so I ask someone to call him on 72 to see if it's me. They cant raise him either. So later on the way back in I see his boat, and hail him. Now he can hear me fine. What the heck is going on. Is it the channel? Or does he have a separate issue? I lt was really odd to me
Low power set on transmit?
Not in line of sight range?
Squelch set way too high?
Herc55,
I had the same sounding issue as your buddy 2 years ago on my boat, tried everything. In my case it turned out to be the soldered joint between my antenna wire and the connector had come loose. I resoldered and everything worked fine. Just a thought for him to check that soldered joint if his is that way. My new boat’s antenna connector is solderless and I’ve not had that issue again. If this is his issue I highly recommend the solderless connector. Hope this helps.
Just about all VHF issues are connector related. I do prefer the crimp style connector but they do require matching crimpers. If you have access to a VSWR meter that will help you Diagnose the issue.
I had the same issue with both my radios. Come to find out that there was a lightning strike near our dock that damaged one of the receiver diodes so it could not receive any signals unless the transmitter was very close. I put two new radios in and then found out my dock mate had the same problem and he sent his back to Icon and they fixed it for $20.00. So I sent my radios back to Standard and the fixed them for $15.00 each