SWC Forums
Pull up a chair...let's talk fishing.
Notifications
Clear all
23/04/2015 7:56 am
A good metal dental style pick or even an awl bent at 90degrees are useful tools for removing seized bearings. When replacing them in trolling reels, clean the housing for the bearing thoroughly and coat it with a bit of marine grease. This way when you service again it will come right out.
Topic starter
23/04/2015 8:24 am
If can get a rope through, stick through, tie a knot or two in the rope and pull it out.
Unfortunately there is a brass bushing that the ball bearing backs up to. It has the same ID as the bearing so I was unable to get at it from the back.
Page 2 / 2
Prev