SWC Forums
Pull up a chair...let's talk fishing.
What does everyone use for their anchor trip? I had a gadget from some guy in England worked pretty well. I actually had 2. One was dropped over board the other got bent pretty bad. So I went to zip ties. Only problem is that my anchor sits on a bow sprit. The zip tie is exposed to the harsh, hot sunlight. They become brittle and will not hold. Anyone have any ideas what I could use instead? Thanks in advance.
I use a length of clothes hanger wrapped 3 times. I twist it around the eye of the anchor and leave about a foot to wrap the chain to the anchor shaft. When im anchoring shallow in sand or anchoring on the beach i just leave it dangling and dont wrap it. When i need it, its already on the anchor and ready. Very cheap when needed to replace!
I use a length of clothes hanger wrapped 3 times. I twist it around the eye of the anchor and leave about a foot to wrap the chain to the anchor shaft. When im anchoring shallow in sand or anchoring on the beach i just leave it dangling and dont wrap it. When i need it, its already on the anchor and ready. Very cheap when needed to replace!
I'm kind of lost here. The hanger is attached to the eye of the anchor. When you are going to use it you wrap it through the chain. I understand that. But when you anchor in sand or shallow water you let it dangle. Isn't your chain attached to the crown of the anchor. If you drop it you have no tension on the anchor shaft, so there is nothing keeping the anchor in place. Unless I am totally missing something here.
Barry, im horrible at trying to explain things so my apologies. I cant be the only one who uses this method so hopefully someone will chime in. If not, i am currently sitting on the river bank and have made a short video description and visual that hopefully will help with your questions.
Unravel some old three strand anchor rope and cut into short lengths (8-12 inches). Just tie it in same place as you put the zip ties with a couple of square knots. Much stronger than zip ties, no rust, and will break when you need it to. This is how Chum and Larry do it.
Barry, im horrible at trying to explain things so my apologies. I cant be the only one who uses this method so hopefully someone will chime in. If not, i am currently sitting on the river bank and have made a short video description and visual that hopefully will help with your questions.
Thanks for the video. Makes perfect sense. I was trying to keep it hooked up at all times rather than switching back and forth. I can just use your method and leave it permanently hooked up the way I have it now using the coat hangar instead of zip ties. Thanks for the video.
Thank you for all of the help. Now I have two different methods. Duane do you just put it through 1 time or do you wrap it? I am thinking that just 1 pass should suffice.
Once
We do a good bit of anchoring, and I have yet to rig a breakaway on any of my anchors. I have only lost one anchor in several thousand sets. It was at night in some rough seas with some very bad bottom in 350 ft. of water. If you are hanging your anchor and needing to use a breakaway, you are dropping your anchor where you should be fishing, and or don't have enough chain and rode to make sure you don't drag and hang. We fly the anchor and sometimes make upwards of 20 sets a day when we have to. Add more chain, use more scope, and drop it in the sand away from the structure and you will not need a breakaway.
Capt John, I've read the article on here about flying the anchor, but have been hesitant to try it. Any chance you could video how you do it the next time you do?
Seapro has it. But I use a copper grounding wire like the power company uses to ground outside your panel box on new construction. Two wraps on the end of the anchor and one and a half around the chain and anchor. That way when it pulls open, it is still attached to the anchor eye to be wrapped again.
Seapro has it. But I use a copper grounding wire like the power company uses to ground outside your panel box on new construction. Two wraps on the end of the anchor and one and a half around the chain and anchor. That way when it pulls open, it is still attached to the anchor eye to be wrapped again.
That is exactly what i used to use! Only reason i switched is because i messed up and ran out on a trip one dsy and the only thing i could find was a clothes hanger in the cabin. I get them free every week with work uniforms so i have a free and endless supply. Southernson made a good point about it still being attached to the anchor to be tied again. This is very nice. You dont have to tie more string or put another ziptie etc on after each time tou break set. Wire of some sort can be used over and over again
I use the cheap 100-150lb white twisted line from walmart several square knots and it will break when you need it. 100 mono works in a pinch, but rarely break it when pulling it. I use a 16lb plow anchor on my boat.
Unravel some old three strand anchor rope and cut into short lengths (8-12 inches). Just tie it in same place as you put the zip ties with a couple of square knots. Much stronger than zip ties, no rust, and will break when you need it to. This is how Chum and Larry do it.
This is cheap and easy. It works like a charm and will only trip when needed. Since I started using this I've only tripped a couple times in a couple years.