SWC Forums

Pull up a chair...let's talk fishing.

Any TideWater Boat ...
 
Notifications
Clear all

Any TideWater Boat Owners???

26 Posts
14 Users
0 Reactions
97.5 K Views
Ryan
 Ryan
(@)
Active Member
Joined: 12 years ago
Posts: 12
Topic starter   [#42901]

Wondering if any other Tidewater owners are having problems with gel coat cracking or issues with their T-Top. I am having problems and I am not very happy at the moment. Carried it in for warranty work and the dealer will not repair, they said it needs to go to the factory. The dealer actually said he wouldn't settle for anything less than hull replacement. He said my T-Top is so loose that I stand a chance of loosing my center console when the top comes off.



   
Quote
zigzag
(@)
Noble Member
Joined: 22 years ago
Posts: 1863
 

does that mean your dealer is going to intervene and get you a new hull?



   
ReplyQuote
Ryan
 Ryan
(@)
Active Member
Joined: 12 years ago
Posts: 12
Topic starter  

I bought the boat while living in SC, I have been here in NC since September and will be here until February. I spoke with the local Tidewater dealer this morning at the boat show and apologized for him getting in the middle of something when he didnt make the sale. Sounds like he is going to assist the best he can, I can't ask for any better from him.



   
ReplyQuote
Christopher Wayne Johnson
(@)
Estimable Member
Joined: 13 years ago
Posts: 126
 

I just purchased a pre-owned 2012 that has almost 200 hours. Everything seems solid so far. Not sure how it was used before I got it, but I'm going to put it to the test this warm season and we will see how it does.

Hope they can get things straightened out for you.



   
ReplyQuote
jack rhyne
(@twoturnin)
Honorable Member
Joined: 22 years ago
Posts: 454
 

25 yrs ago 20' OverNighter G/W had bubble's under gel coat on sides and bottom----G/W's response was our boats will not have gel coat bubbles and fixed all. IMHO I would raise holy hell with manufacturer until they fixed it. BTW bought it from individual and not a dealer---G/W wasted no time fixing this---Kay Crocker Marine was a big hammer Iam sure making sure this stuff got fixed.



   
ReplyQuote
john Smith
(@)
Noble Member
Joined: 18 years ago
Posts: 1776
 

Why would a hull need to be replaced to fix a loose T-Top ?



   
ReplyQuote
Ryan
 Ryan
(@)
Active Member
Joined: 12 years ago
Posts: 12
Topic starter  

The dealer said that he believes something structural underneath the floor is broke. The only way to find out is to take it apart. Who wants a boat that has been separated after spending $55,000? Not me. When I notified Tidewater last summer about that issue, I asked why they couldn't put a back plate underneath and bolt it instead of using screws and I was told it is foam filled and they can't separate the top from the hull.



   
ReplyQuote
William McCann
(@werewolf0711)
Famed Member
Joined: 15 years ago
Posts: 3133
 

Screws should not be an issue for the legs going to the floor. The top should have other braces on the console that are bolted to help with the weight. The legs are more for stabaility. I have some back off on my boat. Dealer fixed them no issues. If there screws and you want them to stay there 5200 them in. But I wouldn't recommend that either I'd probably go more towards 4200 in case you do need them out one day.

As for the rest dpesmt that boat have a warrant. If there is a major issue I'm sure they should take care of it.



   
ReplyQuote
BRIAN
(@bharbaugh)
Prominent Member
Joined: 19 years ago
Posts: 687
 

I have always dealt directly with Jimmy Metts (partner) in Tidewater. All issues I have ever had have been resolved to my utmost satisfaction. If you would like his cell # PM me. I assume it is still good.

I have had my Tidewater since 07 and I plan on keeping it until I win the lottery or stop having fun.



   
ReplyQuote
Ryan
 Ryan
(@)
Active Member
Joined: 12 years ago
Posts: 12
Topic starter  

I have always dealt directly with Jimmy Metts (partner) in Tidewater. All issues I have ever had have been resolved to my utmost satisfaction. If you would like his cell # PM me. I assume it is still good.

I have had my Tidewater since 07 and I plan on keeping it until I win the lottery or stop having fun.

I have his cell # and spoke with him late Friday night. Appreciate it though. I sent them an email letting them know that telephone communication wasn't working well so I requested all further communications be via email. I'm in touch with my insurance agent and I'm hoping I don't have to go that route. We will see.



   
ReplyQuote
Greg Cave
(@caveman)
Trusted Member
Joined: 20 years ago
Posts: 78
 

I purchased a 216 tidewater in 07" and I've never had an issue. Gel coat still looks new!



   
ReplyQuote
David david
(@)
Eminent Member
Joined: 14 years ago
Posts: 33
 

Seems like tidewater is running through some problems in their newer boats, late 2013 and up. I previously owned a 2012 Tidewater 250cc that was like a tank. I now own a 2015 250cc and have found no real issues yet but really haven't had the boat out in much water yet. This is being talked about on a lot of forums right now and is very disturbing. Almost makes me want to not even use the boat.

My question is how much emphasis have they put into this 280cc boat? Have they forgotten about the smaller boats that built their brand. Will update later when check out my new boat.



   
ReplyQuote
Jerry D Woolard
(@jerrydale)
Estimable Member
Joined: 12 years ago
Posts: 107
 

We have a 230CC and this will be our 3rd year fishing it. We haven't had any issues. When the weather is right, we're offshore 3-5 times a month.
Will be interesting to know Tidewater's response.



   
ReplyQuote
Ryan
 Ryan
(@)
Active Member
Joined: 12 years ago
Posts: 12
Topic starter  

TW called this morning (after I sent an email requesting that all future communication be via email) and said they needed the boat back at the factory to make repairs. It is leaving Friday and they said it would take 8-10 days to repair. They said it would be like a brand new boat when I got it back. The dealer doesn't think they can fix it. Time will tell



   
ReplyQuote
Greg Thornburg
(@midnighthour)
Estimable Member
Joined: 20 years ago
Posts: 92
 

Give them a chance to make it right. And when and if they do, be sure to post up how satisfied or dissatisfied you are with repairs. I for one cant believe with how strong their sales are right now, they would leave quality at the door when manufacturing new boats. I have had the pleasure of riding a 250 cc that was an absolute beast. 2.5 years and never put the curtains up. Absolute solid boat. Never got wet!



   
ReplyQuote
Page 1 / 2
Share: