SWC Forums
Pull up a chair...let's talk fishing.
I know the best way to unstick a zipper is to not let it get stuck in the first place, but hind sight is always 20/20.
The zipper for my life jacket storage in my T top is stuck (can still get them out through the sides if i need to). I am really trying not to bust the zipper with brute strength.
I have tried WD-40, corrosion X and lots of other stuff.
Any methods that have worked well for you in the past?
2 person job
I've had luck getting someone to hold each side of the fabric, then position the tip of a flat blade screwdriver on the front part of the zipper body (let the zipper handle flop free). Use pliers or another screw driver (hammers are too heavy, you just want to jarr it) to tap on the handle of the 1st screwdriver.
Same principle as an impact wrench, the sharp jolts work it free
---------------------------------------
now if the teeth are loose all bets are off
Thanks, I will give that a shot
Try hot water. Since it's a plastic zipper I assume it's salt build up, not metal corrosion.
PB blaster or vinegar
Windex with vinegar
Just went through this on my last boat, with curtains and frozen zippers. The teeth are plastic, but not the slider, box, nor stops. I assume your zipper is similar.
I tried boiling water, WD-30, vinegar, etc, and nothing worked. I assume corrosion is bonding the metal slider to the metal insert pin?
If you can get the proper mechanical advantage (might be hard if you're working upside down) rapping the slider with a hammer, or similar, can work. Otherwise, you can gently pry the slot in the slider open slightly with a flat-bladed screw-driver. Even if you break it, it's no big deal, as any curtain or upholstery shop should be able to replace the stop and provide a new slider for a small fee.
Zippers in a marine environment are one of those things that seem to be mired in 1950's technology.
for me.....lots of hot water.
Thanks for all the replies. Im gonna play around some more with it tonight and will hopefully get it done. Its been saturated with Corrosioin X for about 4 days. Im hoping that did something.
Zippers in a marine environment are one of those things that seem to be mired in 1950's technology.
I agree with you there.
Once free I tried everything to keep them from sticking, both plastic and metal. One thing works best ~~ chapstick,,, not the regular but that with beeswax. $1.50 at Dollar General.
Once free I tried everything to keep them from sticking, both plastic and metal. One thing works best ~~ chapstick,,, not the regular but that with beeswax. $1.50 at Dollar General.
Dive shops sell a Teflon grease for wet suit zippers . Use it once a year on enclosure zippers and good to go.
There was this girl I knew back in college....
Oh wait...nevermind...
hot soapy water in a spray bottle.
Rub the candle or balm along the zipper teeth. Wax can sometimes provide the necessary lubrication to release the zipper. Here's a tip I can show you, I learned while playing https://geometry-dashunblocked.com geometry dash unblocked