SWC Forums

Pull up a chair...let's talk fishing.

Garmin 7610 shuttin...
 
Notifications
Clear all

Garmin 7610 shutting down

9 Posts
8 Users
0 Reactions
22.3 K Views
(@capt_dave)
Member Admin Registered
Joined: 3 years ago
Posts: 12511
Topic starter   [#55690]

I have a pair of Garmin 7610 screens. The other day one of them just shut off. Since then .....it will boot and then a few mins later shut down and will not start again for a while.

I bought a 8610 to replace it but geez......2 1/2 years on a unit that costs more than a LOT of cars I have owned over the years. I have a Northstar 951 built in the mid 80’s that still kicking.

Cheap ass junk if you ask me!

Dave



   
Quote
zigzag
(@)
Noble Member
Joined: 22 years ago
Posts: 1863
 

I agree!



   
ReplyQuote
(@curmudgeon)
Noble Member
Joined: 21 years ago
Posts: 1317
 

I'll give you $200 for the carcass, plus shipping ... :wtg:



   
ReplyQuote
Paul Rudar
(@surffishn)
Reputable Member
Joined: 16 years ago
Posts: 262
 

Yikes I have one ! Haven't had any trouble yet. But only a year old. Did you contact Garmin support? Seems like it could be a easy fix.



   
ReplyQuote
(@capt_dave)
Member Admin Registered
Joined: 3 years ago
Posts: 12511
Topic starter  

I'll give you $200 for the carcass, plus shipping ... :wtg:

No but thanks for the offer



   
ReplyQuote
Chad Beaver
(@)
Active Member
Joined: 11 years ago
Posts: 6
 

Exact same issue with one of my Garmin 7212 units. 3 years old and useless. Just replaced both of them with Garmin 1242xsve



   
ReplyQuote
Jeff Kerr
(@lunchmoney)
Reputable Member
Joined: 14 years ago
Posts: 238
 

Had a similar issue with a 741XS. Removed the inline fuse from the circuit and haven't had a problem since.



   
ReplyQuote
Rick Moore
(@beereel)
Prominent Member
Joined: 17 years ago
Posts: 733
 

Dangit I have one on my boat! Already have to send the unit back to Garmin because the glass is delaminating. Sucky part is, there is another issue - I run both a transom mount and thru-hull 'ducer. The temp is totally whacked out (reading ~20 degrees F currently) and I'm having problems with the conventional sonar at idle from the transom 'ducer and lose bottom lock on the thru-hull as soon as I'm up on plane. Some of these items could be the unit itself. But I have to send the unit back for the screen issue first - they repair the glass - and then diagnose the 'ducer problems. Which very well may require the unit to be sent back again. UGH



   
ReplyQuote
William McCann
(@werewolf0711)
Famed Member
Joined: 15 years ago
Posts: 3133
 

Dangit I have one on my boat! Already have to send the unit back to Garmin because the glass is delaminating. Sucky part is, there is another issue - I run both a transom mount and thru-hull 'ducer. The temp is totally whacked out (reading ~20 degrees F currently) and I'm having problems with the conventional sonar at idle from the transom 'ducer and lose bottom lock on the thru-hull as soon as I'm up on plane. Some of these items could be the unit itself. But I have to send the unit back for the screen issue first - they repair the glass - and then diagnose the 'ducer problems. Which very well may require the unit to be sent back again. UGH

Your transducer issue can also be in the transducers themselves. The bottom lock is typically inherent of mounting location and the water it has. Are both transuducers reading the same off temps or is one reading correct and one not?

As for the 7600 issue. It sucks but there are quite a few faulty unit in that line. I'm hoping the 8600 series has that worked out. I just put a 8612 in mine to replace a 4210 that was 8 years old without a single hiccup. The 8612 lost sonar on my first offshore trip when I tried switching from one ducer to the other and after about 15 mins it came back up and worked the whole time and hasn't gave an issue since, knock on wood!



   
ReplyQuote
Share: