SWC Forums
Pull up a chair...let's talk fishing.
Has anyone ever painted their own boat? How easy was it? Any suggestions or handy tips on doing it? I know prep is very important for a good finish....
Not easy. Use awl grip with a foam roller.
If done right it will last for years.
Spraying is easier than rolling. Alexseal or Awlgrip products. Make sure it is fair beforehand, like you said, prep is absolutely key.
Foam rollers are not as prone to leaving "roller lines" especially on curvy surfaces BUT introduce air bubbles and it takes a bit of finesse to roll them out. I use a 3/16 nap wooster roller when I can and foam when it's curvy. Also foam rollers also disenegrate so change them out often to avoid "boogers" in your paint. Also 2 coats is my max, I let it cure then sand with 320 and roll 1 or 2 more. My entire boat is rolled and I have yet to have anyone notice.
Prep and application tools are the 2 keys. I can make $50/gal paint look beautiful by using Wooster "woven" mohair roller covers and premium China bristle brushes. Use a crummy roller cover and a synthetic brush and $300/gal premium linear polyurethane will look like crap. Combine, thorough prep and masking, good tools and good paint and you too can do a great job. Probably for 1/2 the price a pro charges.
Best bet is practice on a buddy's boat -:)).
Thanks guys. I will try it on a '83 McKee Craft before trying it on the Grady. I have refurbished the MC all except the finish. That is my next step. Filling and sanding.
You did a great job. It looks very good.
Let me know if you have any questions, I'll help you out all I can.
I appreciate the offer and may take you up on it. Thanks
Adam,
That looks very professional.
Great job!
Great job, very nice!!!
Great job Adam......can you throw a coat of paint on our basketball team?? Great thing about being at the bottom is we can only go up from here!! Thank goodness for baseball....seems to be our last hope for greatness.

