SWC Forums
Pull up a chair...let's talk fishing.
Is it possible to run one transducer on 2 hard units? I have 2 furunos one sonar and one combo. I'd like to be able to use the sonar on the combo. Is there a splitter?
AIRMAR SB260 Switchbox. Specs says 1 transducer to 2 units. I have no experience with it.
Thanks. I'll check into it
Can you network the head units together via NMEA 0183 or NMEA 2000? (Or some other protocol?)
Depends on the units.
If you have a black box sounder, and NMEA 2k network, you may be able to share the ducer on more than 1 head unit.
I have 2 MFDs, 2 transducers, and black box unit, and both MDFs can see either transducer.
im not familiar NMEA as I do not have that set up. Basically I'd like to have both sonars showing what the transducer is telling them at the same time. It seems that I may be able to switch to one or the other with the ideas given, Ill research futher thanks
Are you guys switching back and forth, or running two at once?
What units do you have?
Furuno 1870f. And furuno 587
Looks like the 1870f is NMEA compatible, but not the 587 without an adapter. However, the NMEA adapter appears only for adding gps sensor or radio, not connecting two units. Fastest "accurate" answer will likely come from Furuno tech support.