SWC Forums

Pull up a chair...let's talk fishing.

Shallow water ancho...
 
Notifications
Clear all

Shallow water anchor sticks

18 Posts
11 Users
0 Reactions
47.7 K Views
Kevin Welsh
(@)
Trusted Member
Joined: 20 years ago
Posts: 52
Topic starter   [#50385]

Does any one know who sells the 10' anchor sticks local in Wilmington. Thanks



   
Quote
Amanda
(@blueoceaneyez)
Famed Member
Joined: 21 years ago
Posts: 3235
 

Island Tackle used to, that's where I bought mine a few yrs ago.



   
ReplyQuote
John
 John
(@piratejuan)
Reputable Member
Joined: 17 years ago
Posts: 299
 

West Marine sells them online if the local store is out of them (which it looks like they are. Closest store with a 10' is New Bern, and North Myrtle has a 12'). You can get it shipped to the local store, and they are usually pretty fast.

If you guys don't mind me switching gears on this, can anyone vouch for these things? I was thinking about getting an 8', along with a motor mount so I don't have to drill into the hull, to use as a rear anchor when beaching it.
1) Do these things work? It seems like passing boat wake would either dislodge the pole or break it.
2) Does the motor mount option get in the way of steering? I ask because I noticed that you can tighten them into place out of the water, without completely removing it, if you're moving from spot to spot, but it seems like the motor would hit it when turning.



   
ReplyQuote
Jamie Blue
(@)
Famed Member
Joined: 20 years ago
Posts: 3660
 

I use the coolwater products ones.

http://shop.coolwaterproducts.com/Fish-Sticks-8-Fiberglass-Stick-Anchor-FS8.htm

They work awesome. I put one at the bow and one at the stern and they hold even when the tide is ripping and big boat wakes come by. I just use a rope instead of a mount, that way it gives some flex and shock absorption, and you can actually stick them further down in the water than having it mounted to the boat. Last summer on July 4th I actually ended up using the 4 footer at the bow and the 8 footer at the stern, and gave my other 8 footer to the boat next to me because his stern anchor wouldn't hold. They work in both mud and sand bottoms.



   
ReplyQuote
Amanda
(@blueoceaneyez)
Famed Member
Joined: 21 years ago
Posts: 3235
 

I vouch for the pins themselves, but have no experience with the mounts.

These hold well in most conditions. When I'm on a very hard bottom & can't stick pole in very far ( and there's lots of wind & current ) sometimes she holds and sometimes not. The best places are softer sand, banks, and mud bottoms where you can really stick in further. I've had these poles bent sideways in the ripping current but the mud and sand held it perfect.

Worth the investment IMO.



   
ReplyQuote
Tom
 Tom
(@seahorse)
Noble Member
Joined: 19 years ago
Posts: 1167
 

Don't remember the name but I bet you could google it. Made in Savannah and it's stainless steel shaft so it has some weight. Everyone down there used them.
This is what they use
https://www.hhlure.com/products/cajun-marsh-anchors?variant=616458377

http://www.driftmaster.com/pole-anchor.html



   
ReplyQuote
John
 John
(@piratejuan)
Reputable Member
Joined: 17 years ago
Posts: 299
 

I wish either of these would make clips that don't screw into the boat. Velcro, some kind of adhesive....just hate putting holes in the boat. My old aquasport had holes all over the place from old electronics, downrigger plates, speakers, or any other stupid thing that one of the previous 50 owners had in mind.



   
ReplyQuote
Jamie Blue
(@)
Famed Member
Joined: 20 years ago
Posts: 3660
 

Just use 5200 if you don't want to screw it in, but screws are the most reliable attachment method.

But I just use a rope around the handle and a cleat. Works great.



   
ReplyQuote
icecreamman
(@)
Noble Member
Joined: 21 years ago
Posts: 2017
 

If you can afford it get a Power Pole, works better than any stick anchor. Stick anchors take too much time when your on fish & don't always hold.

My 10' stick anchor has been reduced to being an emergency push pole. .....ICM



   
ReplyQuote
Drew Morrow
(@)
Eminent Member
Joined: 17 years ago
Posts: 16
 

I have the bracket that mounts to the existing motor mount bolts and I love the set up. I bought the pole (blue in picture) from Island Tackle and the mount on eBay http://m.ebay.com/itm/STICK-IT-ANCHOR-PIN-STARBOARD-RIGHT-MOTOR-MOUNT-/172302389600?hash=item281e05d160%3Ag%3AcCUAAOSw6n5XrK9g&_trkparms=pageci%253Ab4b1e867-fc45-11e6-8e9d-74dbd1801d83%257Cparentrq%253A7b61eca915a0a250551e2411ffeab96a%257Ciid%253A1

I couldn't found anyone in town that stocked the motor mount version and to be honest I was discouraged from one place in particular at the idea of the setup. The "salesman" had a similar setup in stock that day that and I was ready to purchase. He admitted he had no personal experience but all he could say was "it wouldn't hold up well in a ripping current". He proceeded to push the power pole which wasn't in my budget, although I'd love one!! The majority of what I do isn't in a "ripping current" so I went ahead and bought the motor mount version online and have yet to find a situation it didn't work as expected. It's quick and ALOT easier than dragging out your danforth when you are trying to fish a specific spot quickly.

One of these days I'll wind up getting a power pole but for now this works great.img_0240_149.jpgimg_0239_210.jpg



   
ReplyQuote
Drew Morrow
(@)
Eminent Member
Joined: 17 years ago
Posts: 16
 

BTW... it does NOT get in the way of steering, I have a 17' boat with a 70 hp Yamaha. All in all I have about $275 I this set up for pole and mount. Just out of curiosity how much would it cost for a local fabricator to fabricate a mount like this?



   
ReplyQuote
John
 John
(@piratejuan)
Reputable Member
Joined: 17 years ago
Posts: 299
 

BTW... it does NOT get in the way of steering, I have a 17' boat with a 70 hp Yamaha. All in all I have about $275 I this set up for pole and mount. Just out of curiosity how much would it cost for a local fabricator to fabricate a mount like this?

Thanks for the info. I'll probably go the ebay or online route as well.

Also, for those that don't want to store it topside with clips, a few manufacturers make a 2-piece that screws together like a pool cue, so you could probably store an 8' in your console.

http://www.kingpinanchors.com/anchor-poles



   
ReplyQuote
Bernie McCants
(@)
Reputable Member
Joined: 22 years ago
Posts: 289
 

Don't remember the name but I bet you could google it. Made in Savannah and it's stainless steel shaft so it has some weight. Everyone down there used them.

I have a 8' stainless poll made by Bob at South Chatham Tackle. Works great in sand and mud. With mud you can just dart it into the water from the boat and cleat it off.



   
ReplyQuote
Kevin Welsh
(@)
Trusted Member
Joined: 20 years ago
Posts: 52
Topic starter  

I got 2 12' poles from max gain system out of FL. I will let you know how they do when I get time to go out. Thanks for all of the replies..



   
ReplyQuote
Matt
 Matt
(@)
New Member
Joined: 10 years ago
Posts: 1
 

I don't think they're local to Wilmington, however the Bottom Buster anchors come in 8, 10, and 12ft two piece designs. I use two myself, they shipped next day and shipping was around $20 so not bad. Poles are priced right, at under $100 for a two piece 12 ft pole by itself, they also have nice Ram Mount sleeve systems.

http://www.alienlabsusa.com/product-category/boat-accessories/

Several of my buddies use them as well and we all love them.



   
ReplyQuote
Page 1 / 2
Share: