SWC Forums

Pull up a chair...let's talk fishing.

My New Boat - 22' B...
 
Notifications
Clear all

My New Boat - 22' Buddy Cannady - Build Out

90 Posts
28 Users
0 Reactions
208 K Views
Stuart Foreman
(@highspeedwelding)
Estimable Member
Joined: 17 years ago
Posts: 147
Topic starter  

This is the old piece of juniper that I had mentioned. My dad had given it to me a long time ago. Not sure what he had used it for originally, but couldn't think of a better thing to do than to plane it down and use it for my side planking.20170903_105002_111.jpg20170903_105215_250.jpg20170903_113250_778.jpg20170903_113453_167.jpg20170903_120031_175.jpg



   
ReplyQuote
Stuart Foreman
(@highspeedwelding)
Estimable Member
Joined: 17 years ago
Posts: 147
Topic starter  

I helped lock in the planking by staggering the strips within one another. Looking back, I should have cut back more, but we make up for it on the inside/outside with multiple layers of fiberglass. The inside also has backing boards that help tie everything together.20170905_091815_166.jpg20170905_092218_137.jpg20170905_115008_518.jpg20170905_115016_669.jpg20170905_162149_193.jpg



   
ReplyQuote
Stuart Foreman
(@highspeedwelding)
Estimable Member
Joined: 17 years ago
Posts: 147
Topic starter  

Once we had the outside framed up, it was time to climb aboard and lay some more 3/4 plywood down. This help tie everything together, allow for water flow throughout the bilge, and gave the bottom of the boat a total of 1.5" thickness. I then laid some fiberglass on the inside of the bilge. We added a board to the front side of the transom to give the new deck an area to attach to.20170906_143233_795.jpg20170906_143240_810.jpg20170906_180324_151.jpg20170906_180407_197.jpg20170906_180408_198.jpg



   
ReplyQuote
Stuart Foreman
(@highspeedwelding)
Estimable Member
Joined: 17 years ago
Posts: 147
Topic starter  

After doing some sanding, we started to frame up the inside supports. While the frames were drying, we added the first layer of fiberglass to the transom.
We then put the first layer of fiberglass on the bottom where the extension starts.20170911_083848_112.jpg20170911_083605_140.jpg20170916_160650_533.jpg20170916_160710_206.jpg20170916_161220_201.jpg



   
ReplyQuote
Stuart Foreman
(@highspeedwelding)
Estimable Member
Joined: 17 years ago
Posts: 147
Topic starter  

We drilled out holes for our access and notched out drains for the bilge. Then added a layer of epoxy to make sure everything is coated. We added white pigment to this coat.20170930_132018_119.jpg20170930_132024_634.jpg



   
ReplyQuote
Stuart Foreman
(@highspeedwelding)
Estimable Member
Joined: 17 years ago
Posts: 147
Topic starter  

I decided to make use of the extra space and added a 30 gallon fuel tank. Looking back, I would have done this different (please don't ask to build one like this for your boat, LOL). The tank was designed with a notch to allow access for wires and hoses.20180508_144851_915.jpg20180508_144848_195.jpg20180508_144824_320.jpg



   
ReplyQuote
Stuart Foreman
(@highspeedwelding)
Estimable Member
Joined: 17 years ago
Posts: 147
Topic starter  

The new deck was added and from there we framed up the fish box and storage. The starboard storage is for the fuel filter and bilge access. The port storage is for a stern anchor, extra ropes, and bumpers.20180508_173230_368.jpg20180512_121340_628.jpg20180515_152905_569.jpg20180515_224249_193.jpg20180515_224313_607.jpg20180518_235309_127.jpg20180518_235316_186.jpg



   
ReplyQuote
Stuart Foreman
(@highspeedwelding)
Estimable Member
Joined: 17 years ago
Posts: 147
Topic starter  

At this point, I had gotten about as far as I could go. I then hauled the boat to my cousin Aaron that owns and operates Croswait Composites. Here are some photos with her sitting next to another Buddy Cannady that Aaron and his team had just completed.20180519_172326_109.jpg20180519_172343_862.jpg20180519_172359_117.jpg20180519_172406_352.jpg



   
ReplyQuote
Stuart Foreman
(@highspeedwelding)
Estimable Member
Joined: 17 years ago
Posts: 147
Topic starter  

My uncle Bob went the extra mile when he got his hands on her. He started working with Pop Pop building boats when he was around 14. He's built some boats of his own as well. It was nice to receive these photos throughout the process.

We all agreed that the spray rail could be twice as big and have some negative to keep the boat dry. They added a top board to the gunwale to allow for the fish box and storage lids to recess.

The front side of the transom received a signature turn-down that had been added to a lot of BC boats throughout the years. You can also find this signature towards the bow of some if his boats as well.20180519_172406__1_1_154.jpeg20180519_172406__1_6_721.jpeg20180519_172406__1_8_123.jpeg20180519_172406__1_11_141.jpeg20180519_172406__1_13_811.jpeg



   
ReplyQuote
Stuart Foreman
(@highspeedwelding)
Estimable Member
Joined: 17 years ago
Posts: 147
Topic starter  

To to do the fairing. A lot of sanding, a lot of fairing, and a lot of sanding...20180519_172406__1_15_105.jpeg20180519_172406__1_16_113.jpeg20180519_172406__1_21_211.jpeg20180519_172406__1_23_112.jpeg20180519_172406__1_25_174.jpeg20180519_172406__1_27_169.jpeg



   
ReplyQuote
Stuart Foreman
(@highspeedwelding)
Estimable Member
Joined: 17 years ago
Posts: 147
Topic starter  

I didn't believe it when they sent me the photos. I had to come see it for myself. Wow! This was a brand new boat.

After paint, I hauled her back to Wilmington, NC where I had to get going on the rigging. I upgraded my camera to a GoPro, so from here you'll have to check out my YouTube video to see how it all comes together.

The goal was to have it all complete for the Wilmington Boat Show. That was only 17 days away, so I had to get busy and bring it all together.

Thank you for viewing up to this point. I'll post the video once it is complete.20180817_153654_608.jpg20180817_141713_170.jpg20180817_141632_121.jpg20180817_141849_112.jpg



   
ReplyQuote
Dustin Daniels
(@bosunscrew)
Honorable Member
Joined: 20 years ago
Posts: 421
 

She gonna be a bad rig when you’re done Stuart! Love to see life breathed into some of these old works of art that our families built!



   
ReplyQuote
Hal Blackmore
(@)
Prominent Member
Joined: 21 years ago
Posts: 801
 

Stuart,

Great story! I think you should consider a second career as a writer.



   
ReplyQuote
Stuart Foreman
(@highspeedwelding)
Estimable Member
Joined: 17 years ago
Posts: 147
Topic starter  

For those that have been following this thread.. I put down my camera and picked up a GoPro..

We had so much fun filming/editing our first video that we decided to create a new Youtube channel (Fish Fab Hunt).

If you're into any of those (most on this site should be), you'll definitely enjoy what we have to offer.

https://youtu.be/aQrfwZ49-yM

If you enjoy the channel, please LIKE / SHARE / SUBSCRIBE!

Thank you,



   
ReplyQuote
Ken
 Ken
(@strider493)
Trusted Member
Joined: 9 years ago
Posts: 86
 

Real nice video and story on your build. It took a while to get to the end of that road, but lordie what a nice looking rig. Thanks!



   
ReplyQuote
Page 6 / 6
Share: