SWC Forums

Pull up a chair...let's talk fishing.

Stuart Foreman
Stuart Foreman
@highspeedwelding
Estimable Member
Joined: Aug 8, 2009
Topics: 19 / Replies: 128
Topic
7 years ago
Forum
Replies: 6
Views: 19015
Reply

For those that have been following this thread.. I put down my camera and picked up a GoPro.. We had so much fun filming/editing our first video th...

7 years ago
Forum
Reply

I didn't believe it when they sent me the photos. I had to come see it for myself. Wow! This was a brand new boat. After paint, I hauled her bac...

8 years ago
Forum
Reply

To to do the fairing. A lot of sanding, a lot of fairing, and a lot of sanding...

8 years ago
Forum
Reply

My uncle Bob went the extra mile when he got his hands on her. He started working with Pop Pop building boats when he was around 14. He's built some...

8 years ago
Forum
Reply

At this point, I had gotten about as far as I could go. I then hauled the boat to my cousin Aaron that owns and operates Croswait Composites. Here a...

8 years ago
Forum
Reply

The new deck was added and from there we framed up the fish box and storage. The starboard storage is for the fuel filter and bilge access. The port...

8 years ago
Forum
Reply

I decided to make use of the extra space and added a 30 gallon fuel tank. Looking back, I would have done this different (please don't ask to build o...

8 years ago
Forum
Reply

We drilled out holes for our access and notched out drains for the bilge. Then added a layer of epoxy to make sure everything is coated. We added wh...

8 years ago
Forum
Reply

After doing some sanding, we started to frame up the inside supports. While the frames were drying, we added the first layer of fiberglass to the tra...

8 years ago
Forum
Reply

Once we had the outside framed up, it was time to climb aboard and lay some more 3/4 plywood down. This help tie everything together, allow for water...

8 years ago
Forum
Reply

I helped lock in the planking by staggering the strips within one another. Looking back, I should have cut back more, but we make up for it on the in...

8 years ago
Forum
Reply

This is the old piece of juniper that I had mentioned. My dad had given it to me a long time ago. Not sure what he had used it for originally, but c...

8 years ago
Forum
Reply

Once the extension for the bottom had cured, I placed the first 3/4 transom board on the back.

8 years ago
Forum
Reply

With the 3/4 plywood extension frames in place, I then came up from the bottom with 3/4 plywood. I held things in place with clamps while the glue an...

8 years ago
Forum
Page 1 / 10